Notice PHILIPS GC 9220

Notice PHILIPS GC 9220 disponible gratuitement après inscription

Accédez à la notice du PHILIPS GC 9220 en adhérant à la communauté.

Notice d’utilisation de votre PHILIPS GC 9220. La notice vous renseigne sur l’utilisation, donne des solutions aux problèmes d’entretien, de fonctionnement et d’assistance pour votre GC 9220.

Notices - manuels - modes d'emploi disponibles pour PHILIPS GC 9220 après inscription au groupe d'entraide

Aperçu de la notice

Extrait de la notice

service or information or if you have a problem, please visit the Philips website at www.philips.com or contact the Philips Consumer Care Centre in your country (you ?nd its phone number in the worldwide guarantee lea?et). If there is no Consumer Care Centre in your country, go to your local Philips dealer. Troubleshooting This chapter summarises the most common problems you could encounter with the appliance. If you are unable to solve the problem with the information below, contact the Consumer Care Centre in your country. ProblemPossible causeSolution The steam generator produces a pumping sound. Water is pumped into the boiler inside the steam generator. This is normal. If the pumping sound continues nonstop, switch off the steam generator and remove the plug from the wall socket. Contact an authorised Philips service centre. The steam generator does not produce any steam. There is not enough water in the water tank. Fill the water tank. The steam generator is not hot enough to produce steam. Wait until the ‘iron ready’ light on the iron lights up continuously. You do not press the steam trigger.Press the steam trigger and keep it pressed while you steam iron. The water tank is not placed properly in the steam generator. Slide the water tank ?rmly back into the steam generator (‘click’). The appliance is not switched on.Insert the plug in the wall socket and press the on/off button to switch on the appliance. The steam generator has switched off. The auto-shut-off function is activated automatically when the steam generator has not been used for more than 10 minutes. Press the on/off button to switch on the steam generator again. ENGLISH13ProblemPossible causeSolution The light in the on/...

En cours...