Notice SAGEM Photo Easy 150 disponible gratuitement après inscription

Extrait de la notice

rinter is switched on, and you have inserted a memory card, or you have transferred photographs from a GSM mobile phone camera using the IR (infrared) link. The green light blinks while data are being transferred to the printer. After a few seconds, the number of photographs found on the memory card or in the digital camera, or transferred from the GSM mobile phone camera, is displayed on the screen. The light stops blinking. Your photos are printed in four stages. The printer first prints the three colours: yellow, magenta and cyan in that order, then deposits a protective film on the sheet of papier, and finally ejects the photo. The colour of the light shows the printer status: Steady green:printer ready, on standby, Blinking green:data being tranferred, Steady red:incident: refer to the end of this user guide. Remark: To enable you to handle your photographs under the right conditions, the size of the sheets of paper is greater than the printed surface and the two lateral edges are pre-cut. After printing, do not tear these edges abruptly, fold along the dotted line several times and then gently tear off the edges. Tips - The edges can be removed on a number of photos at a time by superimposing them on each other. RAPID PRINTING Select the number of the photograph required using the or keys. Press the key to set the number of copies. Press the key to select print format. You may select a predefined format to print the photographs: · Print your photograph in format 10 x 15 cm full page, no border . · Print your photograph in format 10 x 15 cm with a white border . · Print your photograph in format 10 x 13 cm . · Print 2 photographs per page. · Print 4 photographs per page. · Print 20 photographs per page (contact sheet or index)...