Notice SENNHEISER VMX 100 disponible gratuitement après inscription

Extrait de la notice

headset is connected automatically each time this mobile phone and the headset detect each other. Make sure the headset is switched on and placed close to your mobile phone. • If you have not yet paired the headset to a mobile phone, the headset enters the pairing mode automatically. • If you have already paired the headset to another mobile phone before, you have to enter the pairing mode manu-ally by opening the microphone boom  while pressing the volume button  at the same time. • The LED  flashes alternatingly in red and blue to indicate that the headset is in the pairing mode. On your mobile phone, start a search for Bluetooth devices (see the manual of your mobile phone) and follow any instruction dis-played on your mobile phone dis-play. Once the headset is detected by your mobile phone, select “VMX 100”. When the Bluetooth connection is successfully established, the headset is identified as “VMX 100” in the mobile phone’s display. When your mobile phone prompts a keyword, enter four zeros (0000). VMX 100 OK Keyword 0000    VMX 100_PRT.pdf 1503.05.2007 15:02:12 12 If pairing was successful, the LED  flashes slowly in blue. Once paired, your mobile phone will be able to transfer the call audio to the headset – either automatically or manually (please see your mobile phone’s manual whether the call audio is trans- ferred automatically or manually). Most mobile phones show a headset symbol in their display, if successfully paired. Pairing to other Bluetooth devices If you wish to pair the headset to other Bluetooth devices, please see the Bluetooth device’s manual. Pairing to several mobile phones If you wish to pair the headset to a second mobile phone, you first have to disconnect from the...