Notice SHARP CV-P09FR disponible gratuitement après inscription

Extrait de la notice

LS : AUTO: Manual setting pTEMPERATURE AND TIMER COUNTDOWN INDICATOR aTRANSMITTING SYMBOL sON TIMER/OFF TIMER SYMBOL REMOTE CONTROL DISPLAY 1 2 3 4 5 6 7 8 9 0 q w e r t y u i o p a s1Remove the battery cover at theback of the remote control. 2Insert batteries into the com-partment, making sure the ±±±±± and ————— polarities are correctly aligned. •Lines will appear on the display when batteries are properly in- stalled. 3Reattach the battery cover. 4Press the RESET button using athin pointed implement. E-6 NOTES: •The battery should last approximately one year under normal use. •When replacing the batteries, always change both batteries at the same time, and make sure they are the same type.•If the remote control does not operate normally after replacing the batteries, press the RESET button using a thin pointed implement. •If you will not be using the unit for a prolonged period, remove the batteries from theremote control. LOADING BATTERIES Use two AAA (R03) batteries. Battery cover USING THE REMOTE CONTROLENGLISH E-7 CAUTION •Do not expose the signal receiver window to direct sunlight. This may adversely affect its operation. If necessary, close the curtains to block out the sunlight.•Use of a fluorescent lamp in the same room may interfere with transmission of the signal. •The unit may be affected by signals emitted from other remote controllers for televi-sions, VCRs or other equipment used in the same room. •Do not leave the remote control exposed to direct sunlight or near a heater. Protect the remote control from moisture and shock which can discolor or damage it. Point the remote control towards the units signal receiver window andpress the desired button. A beep will sound when the unit receives the s...