Notice SMEG KSEV96X1 disponible gratuitement après inscription

Extrait de la notice

the bottom of the pan only, making sure that it does not engulf the sides. •Deep fat fryers must be continuously monitored during use: overheated oil can burst into flames. •The hood should not be used by children or persons not instructed in its correct use. MAINTENANCE •Switch off or unplug the appliance from the mains supply before carrying out any maintenance work. •Clean and/or replace the Filters after the specified time period. •Clean the hood using a damp cloth and a neutral liquid detergent. 650 mm min.13GB 300 500 265 898 31073 740 740 min 1060 max 2.1 2.2 2 14.1 15 12c 12a7.2.111 1 11 12a 10 CHARACTERISTICS Dimensions Components Ref.Q.tyProduct Components 11Hood Body, complete with: Controls, Light, Blower, Filters 21Telescopic Chimney comprising: 2.11Upper Section 2.21Lower Section 101Damper 14.12Air Outlet Connection Extension 151Air Outlet Connection Ref.Q.tyInstallation Components 7.2.12Upper Chimney Section Fixing Brackets 116Wall Plugs 12a6Screws 4,2 x 44,4 12c6Screws 2,9 x 9,5 Q.tyDocumentation 1Instruction Manual14GB INSTALLATION Wall drilling and bracket fixing Wall marking: •Draw a vertical line on the supporting wall up to the ceiling, or as high as practical, at the centre of the area in which the hood will be installed. •Draw a horizontal line at: 965 mm above the hob for installation without the back panel, 965 mm above the surface on which the pack panel rests, for installation with the back panel. •Place bracket 7.2.1 on the wall as shown about 1-2 mm from the ceiling or upper limit aligning the centre (notch) with the vertical reference line. •Mark the wall at the centres of the holes in the bracket. •Place bracket 7.2.1 on the wall as shown at X mm below the first bracket (X = hei...