Notice SMEG KTU90X

Notice SMEG KTU90X disponible gratuitement après inscription

Accédez à la notice du SMEG KTU90X en adhérant à la communauté.

Notice d’utilisation de votre SMEG KTU90X. La notice vous renseigne sur l’utilisation, donne des solutions aux problèmes d’entretien, de fonctionnement et d’assistance pour votre KTU90X.

Notices - manuels - modes d'emploi disponibles pour SMEG KTU90X après inscription au groupe d'entraide

Aperçu de la notice

Extrait de la notice

od is set up for evacuation, open the grille panel and make sure that the conver- sion lever or the change-over knob on the centrifugal unit is in the DUCTING position. The charcoal filter is not required. For ducting to the outside, the hood is supplied with a rear and top outlet. A flange spigot of 100 mm diameter (120 mm in certain models) is usually fitted on the top outlet and a blanking plug on the rear outlet. If you choose to duct the hood from the rear of the casing, you should invert the position of the flange and of the blanking plug. Pay attention to the safety regu-lation 1.1. b-Internal recirculation mode To check that the hood is set up for recycling, open the grille panel and make sure that the conversion lever or the change-over knob on the centrifugal unit is in the RECYCLING position. The charcoal filter is to be fitted. To fit the charcoal filter, support the filter with one hand and turn the thumb screw through the centre of the charcoal filter. If the filter is of the interlocking type, turn the filter clockwise. The hood can remain connected to the outside. 2.5-Electrical connection and working test 1-The safety measures 1.2, 1.3, 1.4 and 1.5 of paragraph 1 are to be strictly observed. 2-Once the electrical connection has been completed, check that the worktop illumination, motor and speeds work properly. 3-OPERATION 3.1-Controls are located on the right hand side of the front to operate worktop illumination and select the most suitable working speed for your cooking. To increase the area of extraction, the glass visor should be pulled open. The top speed should be used when frying or cooking foods with strong odours, while a lower speed can be used for normal cooking. To obtain the best performance from your hood, turn it on...

En cours...