Notice SONY CDX-GT200

Notice SONY CDX-GT200 disponible gratuitement après inscription

Accédez à la notice du SONY CDX-GT200 en adhérant à la communauté.

Notice d’utilisation de votre SONY CDX-GT200. La notice vous renseigne sur l’utilisation, donne des solutions aux problèmes d’entretien, de fonctionnement et d’assistance pour votre CDX-GT200.

Notices - manuels - modes d'emploi disponibles pour SONY CDX-GT200 après inscription au groupe d'entraide

Aperçu de la notice

Extrait de la notice

ions with the AF and TA setting You can preset RDS stations along with the AF/ TA setting. If you use the BTM function, only RDS stations are stored with the same AF/TA setting. If you preset manually, you can preset both RDS and non-RDS stations with the AF/TA setting for each. 1Set AF/TA, then store the station with BTM or manually. Presetting the volume of traffic announcements You can preset the volume level of the traffic announcements so as to not miss hearing them. 1Rotate the volume control dial to adjust the volume level. 2Press and hold (AF/TA) until “TA” appears. Receiving emergency announcements With AF or TA on, the emergency announcements will automatically interrupt the currently selected source. Staying with one regional programme — REG When the AF function is on: this unit’s factory setting restricts reception to a specific region, so you will not be switched to another regional station with a stronger frequency. If you leave this regional programme’s reception area, set “REG-OFF” in setup (page 10). Note This function does not work in the UK and in some other areas. AF (Alternative Frequencies) Selects and retunes the station with the strongest signal in a network. By using this function, you can continuously listen to the same programme during a long-distance drive without having to retune the same station manually. TA (Traffic Announcement)/TP (Traffic Programme) Provides current traffic information/ programmes. Any information/programme received, will interrupt the currently selected source. PTY (Programme Types) Displays the currently received programme type. Also searches your selected programme type. CT (Clock Time) The CT data from the RDS transmission sets the cl...

En cours...