. Tip If you adjust the volume level during a traffic announcement, that level will be stored into memory for subsequent traffic announcements, independently from the regular volume level. Staying with one regional program — REG When the AF function is on: this unit’s factory setting restricts reception to a specific region, so you will not be switched to another regional station with a stronger frequency. If you leave this regional program’s reception area, set “REG-OFF” in setup during FM reception (page11). Note This function does not work in the UK and in some other areas. AF (Alternative Frequencies) Selects and retunes the station with the strongest signal in a network. By using this function, you can continuously listen to the same program during a long-distance drive without having to retune the same station manually. TA (Traffic Announcement)/TP (Traffic Program) Provides current traffic information/programs. Any information/program received, will interrupt the currently selected source. PTY (Program Types) Displays the currently received program type. Also searches your selected program type. CT (Clock Time) The CT data from the RDS transmission sets the clock. BA SelectTo AF-ONactivate AF and deactivate TA. TA-ONactivate TA and deactivate AF. AF, TA-ONactivate both AF and TA. AF, TA-OFFdeactivate both AF and TA. continue to next page t10 Local Link function (UK only) This function enables you to select other local stations in the area, even if they are not stored on your number buttons. 1During FM reception, press a number button ((1) to (6)) on which a local station is stored. 2Within 5 seconds, press again a number button of the local station. Repeat this procedure until the local st...