Notice SONY CDX-GT45 disponible gratuitement après inscription

Extrait de la notice

When tuning in stations while driving, use Best Tuning Memory (BTM) to prevent an accident. Storing automatically — BTM 1Press (SOURCE) repeatedly until “TUNER” appears. To change the band, press (MODE) repeatedly. You can select from FM1, FM2, FM3, MW or LW. 2Press and hold the select button. The setup display appears. 3Press the select button repeatedly until “BTM” appears. 4Press (SEEK) +. The unit stores stations in order of frequency on the number buttons. A beep sounds when the setting is stored. Storing manually 1While receiving the station that you want to store, press and hold a number button ((1) to (6)) until “MEM” appears. Note If you try to store another station on the same number button, the previously stored station will be replaced. Tip When an RDS station is stored, the AF/TA setting is also stored (page10). Receiving the stored stations 1Select the band, then press a number button ((1) to (6)). Tuning automatically 1Select the band, then press (SEEK)+/– to search for the station. Scanning stops when the unit receives a station. Repeat this procedure until the desired station is received. Tip If you know the frequency of the station you want to listen to, press and hold (SEEK)+/– to locate the approximate frequency, then press (SEEK)+/– repeatedly to fine adjust to the desired frequency (manual tuning). RDS Overview FM stations with Radio Data System (RDS) service send inaudible digital information along with the regular radio program signal. Display items ATA/TP*1 BRadio band, Function CFrequency*2 (Program service name), Preset number, Clock, RDS data *1“TA” flashes during traffic information. “TP” lights up while such a station is received. *2While receiving the RDS statio...