Notice THOMSON ROC 4206

Notice THOMSON ROC 4206 disponible gratuitement après inscription

Accédez à la notice du THOMSON ROC 4206 en adhérant à la communauté.

Notice d’utilisation de votre THOMSON ROC 4206. La notice vous renseigne sur l’utilisation, donne des solutions aux problèmes d’entretien, de fonctionnement et d’assistance pour votre ROC 4206.

Notices - manuels - modes d'emploi disponibles pour THOMSON ROC 4206 après inscription au groupe d'entraide

Aperçu de la notice

Extrait de la notice

, or to enter two codes, one code per device. Consult the separate list to discover this. Before you start programming, you must find the subcode or code of the subset to be controlled (television or video recorder). GB 2 Refer to the list supplied with this user manual (see page subcodes or codes). 1. Switch on the COMBO you want to control. 2. Hold down the SETUP until the red indicator lamp remains lit (the indicator light remains on for a few seconds to give you the time to proceed with the following steps. The indicator lamp flashes when this time is almost up, and then goes off). 3. Press the TV key, then follow one of the programming methods (A, B, C or D) described earlier. 4. If a second code programming is required, then repeat steps 2 and 3 above. 4 - How to retrieve a programmed code It may be useful to retrieve the code programmed in the remote control. 1. Hold down the SETUP until the red indicator lamp remains lit (the indicator light remains on for a few seconds to give you the time to proceed with the following steps. The indicator lamp flashes when this time is almost up, and then goes off). 2. Press the key that corresponds to the type of equipment you want to control: TV, DVD/VCR… 3. Press SETUP again briefly. The red indicator lamp flashes once. 4. Press the number keys (0 to 9) in ascending order until the red indicator lamp flashes once. 5. The digit which made the red indicator lamp flash, is the first number of the 4-digit code. Please make note of it. 6. Repeat step 4 to find out the two other numbers of the code. 7. When the fourth number is found, the red indicator lamp goes off. 5 - Check of the programming - For a television or a satellite receiver: switch on and,...

En cours...