Notice SMC EZ Connect Wireless Ethernet Adapter SMC2671W

« tallation Guide. Immediately inform your dealer in the event of any incorrect, missing or damaged parts. If possible, please retain the carton andoriginal packing materials in case there is a need to return theproduct. Please register this product and upgrade the product warranty at SMC’s Web site: http://www.smc.com or http://www.smc-europe.com Package Contents English2-11 Deutsch12-21 Français22-31 Español32-41 Italiano42-51 Svenska52-61 Nederlands62-71 Português72-81 Compliances, Information82 - 86 ContentsThe EZ Connect TM 11Mbps Wireless Ethernet Adapter supports 1, 2, 5.5 and 11 Mbps half-duplex connections to Ethernet networks. This device is fully compliant with 2.4 GHz DSSS CSMA/CA wireless networking as defined in IEEE 802.11b. It can be connected via an RJ-45 connection to devices such as Nintendo GameCube, Microsoft Xbox, Sony PlayStation II, and Ethernet ready embedded devices. It can also function as an IEEE 802.11b Access Point or as a RangeExtender. The EZ Connect TM 11Mbps Wireless Ethernet Adapter has three types of LED indicators. Please check the picture: the front view of the Adapter and the table below, which displays the current state the specific LED signifies. LED Status Function PowerOn (Red) Power on. (PWR)Off No Power. WirelessBlinking (Green) Wireless LAN LANconnection is transmitting or receiving. LANBlinking (Green) Blinking: Wired LAN connection is On (Green) transmitting or receiving. Off (Orange) On (Green): Device is connected at 100Mbps. Off (Orange): Device is connected at 10Mbps active. English 4 Hardware English 3 System Requirements • A web browser, such as Microsoft Internet Explorer 5.5 or above installed on one PC at your site for configuring the Wireless Ethernet Adapter. • CD-ROM drive. • An AC power outlet. • Wired or Wireless Network Adapter. • An available RJ-45 (UTP) port on an Ethernet hub or switch. • TCP/IP network protocol installed on each PC that needs to access the Internet. (TX/RX) (LINK/ACT)English 6 English Applications SMC’s EZ Connect TM 2.4GHz 11Mbps Wireless Ethernet Adapter (SMC2671W) can function as: • an Ethernet to Wireless Bridge, providing a wireless connection via an RJ-45 connection to devices such as Microsoft Xbox and Ethernet ready embedded devices. • a standard IEEE 802.11b access point. • a wireless range extender, allowing you to effectively extend the coverage of another SMC2671W that is configured to operate in Access Point mode. This solution offers fast, reliable wireless connectivity with considerable cost savings over wired LANs (eliminates long-term maintenance overhead for cabling). Just install enough wireless access points to cover your network area, plug wireless cards into your notebooks or install wireless adapters into your desktops, and start networking. Use this device in conjunction with SMC’s EZ Connect TM Wireless Cards to create an instant network that integrates seamlessly with Ethernet LANs. Moreover, moving or expanding your network is as easy as moving or installing additional access points – no wires! EZ Connect TM wireless products offer a fast, reliable, cost-effective solution for wireless Ethernet client access to the network in applications such as: • Video Game Systems Provides wireless Internet access for users of video game systems such as Nintendo GameCube, Microsoft Xbox and Sony PlayStationII. • Remote acc... »