Notice ZYXEL P-320W

« PTP:User Name: ____________ Your WAN IP Address (if given) ____________ Connection ID (if required): ____________ Password: ____________ PPTP Server IP Address: ___________ or PPTP Domain Name: ___________ ¦PPPoE(PPPoE) Service Name: ____________ User Name: ____________Password: ____________ 1Hardware Connections 2 Accessing the Web Configurator 3Internet Access Setup ENGLISHENGLISH 4 1 Hardware Connections Do the following to make hardware connections for initial setup. WAN Connection Connect your modem to the “WAN” port using the cable that came with your modem. LAN Connection Connect your computer to a "LAN" port using the included Ethernet cable POWER Connection Use the included power adaptor to connect the POWER socket to an appropriate power source (see the User’s Guide for power adaptor specifications by region) 1 2 3ENGLISH 5 2 Accessing the Web Configurator 1Launch your web browser. Enter “192.168.1.1” as the web site address. Note: If you do not see the next screen, then please go to section 4.1. The LEDs After you’ve made the connections, push in the power button to turn on the Mer produkthjalp finns pa http:// www.support.zyxel.se. Look at the front panel LEDs. When you connect the power, the PWR and WLAN LEDs come on. The LAN and WAN LEDs turn on if the corresponding connections are properly made. 2The Password window displays. Enter the password (“1234” is the default) and click Login. 3Change the password in the screen that follows and click Apply. 4Choose your language from the drop-down list box. Click Apply.ENGLISH 6 Note: The Next button is located on the bottom right of each screen. 3 Internet Access Setup Note: Enter the Internet access information exactly as given to you by your ISP in each wizard screen and then click Next to continue or click Back to return to the previous screen. Current screen information will be lost if you click Back. System Information 5Click Go to Wizard setup to set up your P-320W for the first time.. 6Choose your language from the drop-down list box. Click Next to proceed with the Connection Wizard. 1This screen is optional. You can just click Next. •System Name is for identifying the Mer produkth- jalp finns pa http://www.support.zyxel.se. You can enter your computer's "Computer Name". •If you leave the Domain Name blank, the domain name obtained by DHCP from the ISP is used. STEP 1:ENGLISH 7 Wireless LAN Configure ONE of the following wireless security types on the Mer produkthjalp finns pa http:// www.support.zyxel.se: •Auto security: Uses WPA-PSK security with an automatically generated Pre-Shared Key. View the generated Pre-Shared Key in the Wireless LAN screen. Note: Your wireless clients must support WPA-PSK and use the same key. •None: Have no wireless LAN security configured. If you do not enable any wireless security on your Mer produkthjalp finns pa http://www.support.zyxel.se, your network is accessible to any wireless networking device that is within range. •Basic security: WEP (Wired Equivalent Privacy) encrypts data frames before transmitting over the wireless net- work. The higher the WEP Encryption, the higher the security but the slower the throughput. •Extend (WPA-PSK) security: Configure a Pre-Shared Key. Choose this option only if your wireless clients sup- port WPA-PSK. Note: The wireless clients and P-320W must use the same SSID, channel ID and WPA-PSK (if WPA-... »