Notice INFOSEC SmartLine SL500

« environments. Smart Line is equipped with 2 or 3 secured outlets (depending on the model) which benefit from backup time for critical devices and 2 RJ11 surge protected outlets. 2. MAIN CHARACTERISTICS 2 or 3 secured outlets (depending on the model) 2 RJ11 surge protected outlets Tel/Fax/Modem line surge protection Up to 30 mn backup time (depending on the model and the connected load) Wide input voltage range High frequency technology Microprocessor control guarantees high reliability Compact size, light weight Easy to install and use 3. SAFETY INSTRUCTIONS – Security Risk of Electric Shock: The Smart Line unit is potentially using hazardous voltages. Do not take this equipment apart. It does not contain accessible components to be repaired by users. All repairs should be performed by qualified technicians only. The utility power outlet shall be near the equipment and easily accessible. To isolate Smart Line from AC input, remove the plug from the utility power outlet. The mains socket outlet that supplies Smart Line shall be installed near the UPS and shall be easily accessible. Smart Line has its own internal power supply (battery). There is a risk that output sockets may still be live after Smart Line has been disconnected from the mains power supply. Install Smart Line in a temperature and humidity controlled indoor area free of conductive contaminants. Smart Line should not be exposed to direct sunlight or heat-emitting sources. Do not cover the ventilation grills. Disconnect Smart Line from AC power before cleaning it. Do not use product but only a damp cloth. In case of emergency, switch Smart Line into off position and disconnect the product from the AC power. When Smart Line is out of order, please refer to “trouble shooting” section and contact the hot line. Infosec UPS System - 4, rue de la Rigotière – 44700 Orvault – FRANCE - www.infosec.fr Hot Line : tel : + 33 (0)2 40 76 15 82 - fax : + 33 (0)2 40 94 29 51 - hotline@infosec.fr – 03 05 04 206 15 3 Connected products: The sum of the leakage current of Smart Line and the connected equipment should not exceed 3,5 mA. Make sure that the connected load does not exceed the power of Smart Line : to ensure improved backup time and longer battery life, we recommend a load equivalent to 1/3 of nominal power. Do not leave any container with liquid on the UPS or close to it. Smart Line has been designed for personal computers. It should not be used with power electronic equipment with inductive loads such as motors or fluorescent lights. Do not connect any household appliances such as microwave, vacuum cleaner, hair dryers to Smart Line, or any life-supporting system. Due to excessive consumption, laser printers should not be connected to the UPS. About batteries: Qualified technicians are recommended to change the battery. Do not dispose of the battery in a fire as it may explode. Do not open or mutilate the battery. Released electrolyte is harmful to the skin and eyes. It may be toxic. Smart Line contains one/two large-capacity batteries. So the shell shall not be opened, otherwise such dangers as electric shock will be caused. If any overhaul or replacement of the battery is required, please contact the distributor. Servicing of batteries should be performed or supervised by perso... »