Notice TRUST PW-4050T

Notice TRUST PW-4050T

Mode d'emploi TRUST PW-4050T disponible.

Groupe d'entraide des utilisateurs TRUST PW-4050T

Bienvenue dans le groupe d'entraide des utilisateurs
TRUST PW-4050T

Le groupe d'entraide TRUST PW-4050T vous donne des conseils d'utilisation, solutions aux problèmes de fonctionnement, entretien et assistance pour votre Onduleur. Rejoignez GRATUITEMENT notre groupe d'entraide PW-4050T pour vous aider à mieux utiliser votre Onduleur TRUST. Le SAV entre consommateurs donne accès à différents services pour votre TRUST PW-4050T : accès à la notice PW-4050T et mode d'emploi pdf, manuel d'utilisation en français, avis consommateur et forum actif. Soyez le premier membre actif de ce groupe d'entraide.

Dernières actualités du groupe d'entraide TRUST PW-4050T

Nouvelles questions du forum

Nouveaux membres

  • nogopet376  depuis le 14/12/2020 - Expertise (non renseigné) - Utilisateur depuis (non renseigné)
  • ThierryGrimoult  depuis le 20/07/2014 - Expertise (non renseigné) - Utilisateur depuis (non renseigné)

Documentation disponible sur votre produit

Pas d'image disponible

Notice disponible après inscription gratuite au groupe d'entraide

Manuel/Notice/Mode d'emploi | 2 581 K | Français

Pas de lien disponible

Pas de vidéo disponible

« PS backup! UPS least 20cm away from monitor! 3 UPS on The UPS might be battery low due to its self-discharge characteristic; suggest to charge 8 hours before using battery power! 4 PC on Replacing fuse 5 UPS completely off 6 Use fuse of same rating (250V, 8A)! (B) stores a backup fuse! Open fuse holder Replace a proper fuse at position A Reminder UPS is charged only when AC power is supplied and UPS is on! Fully discharge then recharge the battery every 3 months for longer battery life! Connect incoming analogue phone line to D; Connect a telephone or modem to C! Backup time is related to the connected devices and battery condition! UPS does not have dial-up function nor smart management like message alarm! Conductive device, like laser printer, is suggested to connect to the Surge Only output! User’s manual 2 Specification Model 14948 14949 14950 14938 Operation type Line Interactive Output capacity 500VA /240W 600VA / 300W 750VA /360W 950VA /480W 230 VAC Voltage range 170 ~ 274 VAC Input Frequency 47-63 Hz 230 VAC Frequency 50 / 60 Hz Output Freq. regulation +/- 1 Hz Surge current protection [J] Max. 150 Maximum surge current [Amp] 6,500 A Transfer time (typical) Less than 3 ms Battery type & number 12 V/4.5 AH, 1 pc. Or 6V / 4Ah, 2pcs. 12 V/7 AH, 1 pc. 12 V/9 AH, 1 pc. Backup time (min.) 12 ~ 30 26 ~ 45 34 ~ 60 Battery Charge time 8 hours to 90% after full discharge Working surroundings 0 – 40° C, 0-90% relative humidity Surroun dings Sound level Less than 40 dB Weight 4.9 kg 6.7 kg Minimum load 40.8W 51W 61.2W 81.6W Indication and audio alarm Indicator Sound Output Char- ging Description What to do? - - - No UPS is turned off Turn the UPS on using the ON/OFF button. Blue - 230 V Yes Normal use No action. User’s manual 3 UK No input voltage No input voltage. Is now using the battery voltage. Save your data and turn off your computer. Blue (flashing) A beep every 10 seconds 230 V No No input voltage and load on UPS is too low Due to Green Power function, UPS may shut down in 5 minutes when the load is lower than +/-10% of the minimum load required. Blue (flashing quickly) Beep every second 230 V No Battery low. UPS will turn off soon. Save your data immediately and turn off your computer. For extensive service, register at www.trust.com/register. Safety • Warning: This product contains sealed lead-acid battery(s). May release toxic materials into the environment when not disposed properly. Must be recycled properly. Contact your local government. Short circuit of the battery(s) may cause burns, fire or explosion. Do not disassemble, puncture or expose to high temperatures. Acid and toxic materials might be released, causing injury. • This UPS generates leakage current less than 0.5mA, please use in comfort. • The sum of the leakage current of the UPS and its connected equipments must not exceed 3.5mA. • Do not open or repair this device. • Disconnect the power plug from the mains supply before cleaning the device. • Keep this device away from liquids, such as water. • Do not use this device in combination with non-computer related items, such as medical equipment, microwave ovens, vacuum cleaners, etc. • Make sure the UPS is placed on a firm s... »

En cours...