Notice CREATIVE Sound Blaster Audigy 4 Pro

« steps below: i. Start Windows Explorer. ii. On the left pane, click the My Computer icon. iii. Right-click the CD-ROM/DVD-ROM drive icon, and then click AutoPlay. 4. Follow the instructions on the screen to complete the installation. 5. When prompted, restart your computer. You can use Diagnostics to test the software and hardware installation. Go to Start ? Programs ? Creative ? Sound Blaster Audigy 4 Pro ? Diagnostics. 44 Uninstalling drivers and applications Refer to the Installing Software chapter in the User's Guide (on CD). These instructions are applicable to all Windows operating systems. With Compact Disc Digital Audio (CDDA) extraction enabled on your computer's operating system, you do not have to use an audio cable to connect your drive to your audio card. For more information, refer to the User's Guide (on CD). Go to d:\Manual\<Language>\ Manual.chm (replace d:\ with your CD-ROM drive letter and <Language> with the language that the document is in). Optional Connections Front panel of External I/O Hub Headphones Personal audio MiniDisc/DAT Recording digital audioDynamic microphone Recording voice and acoustic instruments Electric Guitar Line level electric guitar output Rear panel of External I/O Hub Cassette recorder Analog audio recording AD_LINK 1 AD_LINK 2 Sound Blaster Audigy 4 Pro audio card MIDI devices Creating and recording MIDI musicDVD player Watching DVD movies AV Amplifier Listening to digital music Creative Inspire 5.1 Digital Speakers Crystal-clear digital sound TMVCD player Watching VCD movies and concerts DEPT NL ES IT SV NO DA FI CZ PL RU FR To prevent permanent damage, use only the Sound Blaster Audigy 4 Pro audio card with the External I/O Hub. Do not force any cable into a connector. This can cause permanent damage to your hardware. What You Need (a) Remove metal bracket (b) PCI slot CD_SPDIF AUX_IN (b) PCI slot (a) Insert Sound Blaster Audigy 4 Pro audio card into PCI slot Useful Information Make sure you select the sampling rate of the PCM SPDIF output of your Digital Out connector to match the requirements of your receiving device. The choices available are 48 kHz or 96 kHz. If you do not hear any sound from your digital speakers or experience intermittent hissing, you may need to select a lower digital output sampling rate. To select the digital output sampling rate: 1. In Creative MediaSource Go! Launcher, click the Product Settings tab. 2. Double-click the Audio Console icon. 3. Click the SPDIF I/O tab. 4. Click the required sampling rate from the Digital Output Sampling Rate list. For more technical updates, go to www.soundblaster.com. For more information, refer to the User's Guide (on CD). Digital output sampling rateUser's Guide (on CD) IEEE 1394DV camcorder IEEE 1394 Digital camera IEEE 1394 Hard disk IEEE 1394 External CD-RW drive IEEE 1394 Creative digital audio player SB1394 AUX_INCD_SPDIF (e) Phillips-head screwdriver (not included) (b) Sound Blaster Audigy 4 Pro audio card (a) Sound Blaster Audigy 4 Pro External I/O Hub(d) AD_LINK cable(c) Power converter cable SB1394 AUX_INCD_SPDIF (c) Connect AD_LINK cable When connecting the AD_LINK cable, always insert the AD_LINK 1 (larger) connector first, ensuring that the catch is firmly locked. To unplug the connector, press the side springs down to... »