Notice SONY VGP-BMS10

« this manual, the ™ or ® marks are not specified. Before use This product is a laser mouse equipped with Bluetooth technology. It can be used with IBM PC/AT compatible computers pre-installed with the Windows 7, Windows Vista or Windows XP (SP2 and after) operating system and integrated built-in Bluetooth functionality (as of January 2010). Depending on the personal computer or version of software you are using, the mouse may not operate by function correctly. Consult your nearest Sony dealer about proper operating environments and information about Sony VAIO and Bluetooth compatibility. Notes •Operation cannot be guaranteed for all computers meeting the above system requirements. •Operation is not guaranteed for home-built computers, whitebox PCs, and computers with an upgraded OS or multiboot system environment. About the replacement button cover The VGP-BMS15 comes with a replacement button cover. For details on how to replace the button cover, refer to the illustrations printed inside the package of this product. Notes •When replacing the button cover of the VGP-BMS15, do not insert your fingernail in the gap between the cover and mouse body, or attempt to pry the cover off with your fingernail. •Do not use the VGP-BMS15 when the button cover is not attached to it. •The button cover of the VGP-BMS10 is not replaceable. Part names Note The laser light from the lens is invisible. When the mouse is turned on, the lens part does not light up. This is not a malfunction. English WARNING To reduce the risk of fire or electric shock, do not expose the unit to rain or moisture. Owner’s Record The model number and the serial number are located inside the battery compartment of the mouse. Record the serial number in the space provided below. Refer to this number whenever you call your Sony dealer regarding this product. Model No.VGP-BMS10 / VGP-BMS15 Serial No.____________________ Caution Do not look directly into the lens. The laser light may cause eye injury. To prevent battery fluid leaks and damage, observe the following precautions: •Insert the batteries with the correct +/– orientation. •Do not charge dry cell batteries. •Do not mix old and new batteries, or batteries of a different type. •If the mouse has not been used for a long time, remove the batteries. •If a battery fluid leak occurs, carefully wipe the battery compartment, and insert new batteries. •To prevent accidental operation, be careful not to press any buttons when replacing the batteries. If any solid object or liquid falls onto the mouse, set the power to off and have it checked by qualified personnel before continuing its use. Do not place the mouse in a location where it is: •On an unstable surface •In very humid areas or where there is no ventilation •Subject to excessive dust •Subject to direct sunlight or extreme heat •Extremely cold If the mouse is brought directly from a cold to a warm location or is placed in a very damp room, moisture may condense on the inside of the mouse. If this occurs, the mouse may not work properly. In this case, wait about 30 minutes for the moisture to evaporate. If the mouse does not work properly after one hour, consult your nearest Sony dealer. For customers in Europe Sony hereby declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. To obtain a copy of the Declaration of Conformity (DoC) with th... »