Notice BLACK & DECKER BL10475

« e any appliance with a damaged cord or plug or after the appliance malfunctions or is dropped or damaged in any manner. Return the appliance to the nearest authorized service facility for examination, repair, or electrical or mechanical adjustment. Or, call the appropriate toll-free number listed on the cover of this manual. ?The use of attachments, including canning jars, not recommended or sold by the appliance manufacturer may cause fire, electric shock, or injury. ?Do not use outdoors. ?Do not let the plug or cord hang over the edge of table or counter. ?Keep hands and utensils out of container while blending to reduce the risk of severe injury to persons or damage to the blender. A scraper may be used but must be used only when the blender is not running. ?Blades are sharp. Handle carefully. ?To reduce the risk of injury, never place cutter assembly blades on base without the jar properly attached. ?Always operate blender with cover in place. ?When blending hot liquids, remove center piece of two-piece cover. ?Do not use appliance for other than intended use. SAVE THESE INSTRUCTIONS. POLARIZED PLUG (120V Models Only) This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit into a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to modify the plug in any way. ELECTRICAL CORD The cord of this appliance was selected to reduce the possibility of tangling in or tripping over a longer cord. If more length is needed, use an extension cord rated no less than 15-amperes. (For 220 volts rated products, use an extension cord rated no less than 6-amperes). When using an extension cord, do not let it drape over the working area or dangle where someone could accidentally trip over it. Handle cord carefully for longer life; avoid jerking or straining it at outlet and appliance connections. TAMPER-RESISTANT SCREW Warning:This appliance is equipped with a tamper-resistant screw to prevent removal of the outer cover. To reduce the risk of fire or electric shock, do not attempt to remove the outer cover.There are no user-serviceable parts inside. Repair should be done onlyby authorized service personnel. Note: If the power supply cord is damaged, it should be replaced by qualified personnel or in Latin America by an authorized service center. BL10475BMPub1000003144 7/18/06 3:01 PM Page 24 BLENDER JAR ASSEMBLY 1.Before first use, wash all parts except the unit base. Putthe gasket on top of the blade assembly. 2.Place the blade assembly into the jar base and turn the jar base clockwise until tight. 3.Interlock System:Place the assembled Jar onto the unit base and turn toward lock () until secured in place. You’ve engaged the interlock system if you lift the jar handle and the entire blender lifts together as one unit. Howto Use This product is for household use only. 1.Be sure the unit is OFF and plug the cord into a standard electrical outlet. 2.Place the food to be blended into the jar and the lid on the jar before blending. 3.Be sure that the lid cap is in place. When crushing ice or hard foods, keep one hand on the lid. 4.Select the desired speed setting (A). Choose the speed that best suits your task for food or beverage blending. Press the LOW/HI button in combination with the task... »