Notice DELL Latitude XT2

« Latitude are trademarks of Dell Inc.; Microsoft and Windows are registered trademarks of Microsoft Corporation in the United States and/or other countries. Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Inc. disclaims any proprietary interest in trademarks and trade names other than its own. Model PR12S November 2008P/N J304NRev. A00 book.book Page 2 Monday, December 1, 2008 10:33 AMMedia Base3 Media Base Back and Left View Features 1Tablet-PC release lever2AC adapter connector 3audio connector4IEEE 1394 5VGA video connector6digital video interface (DVI) connector 7serial connector8USB connector 9powered USB connector10network connector 11USB connector12optical drive in media bay 1 2 3 4 5 6 9 7 10 8 11 12 book.book Page 3 Monday, December 1, 2008 10:33 AM4Media Base Top and Right View Features Before Docking or Undocking Your Tablet-PC to the Media Base WARNING: If you are using a multiple-outlet power strip, use caution when you plug the AC adapter power cable into the power strip. Some power strips may allow you to insert the connector incorrectly. Incorrect insertion of the power connector could result in permanent damage to your media base as well as electric shock and/or fire. Ensure that you insert the ground prong of the power plug into the mating ground contact of the power strip. CAUTION: Always use the Dell AC adapter that came with the media base. If you use any other commercially available AC adapter—or the AC adapter from earlier models of Dell computers—you may damage the media base or the Tablet-PC. 1docking connector2security cable slot 3Tablet-PC release lever4USB connector 4 3 2 1 book.book Page 4 Monday, December 1, 2008 10:33 AMMedia Base5 CAUTION: When you disconnect the Dell AC adapter cable from the Tablet-PC or media base, hold the connector, not the cable itself, and pull firmly but gently to avoid damaging the cable. When you wrap the AC adapter cable, ensure that you follow the angle of the connector on the AC adapter to avoid damaging the cable. CAUTION: Use the Latitude™ XT2 media base with your Latitude XT2 only. If you use a media base from earlier models of Dell computers you may damage the media base or the Tablet-PC. Before Docking Your Tablet-PC 1Save and close any open files, and exit any open programs. 2Connect the AC adapter to the AC adapter connector on the media base and to an electrical outlet. 3Before you dock your Tablet-PC to the media base for the first time, theTablet-PC operating system must have completed its setup process: aEnsure that the Tablet-PC is not connected (docked) to the media base or to the battery slice. bTurn on the Tablet-PC. cVerify that the Microsoft® Windows® desktop appears. dShut down the Tablet-PC. book.book Page 5 Monday, December 1, 2008 10:33 AM6Media Base Before Undocking Your Tablet-PC 1Save and close any open files, and exit any open programs. 2Set your Tablet-PC power management settings to ensure that the Tablet-PC does not enter sleep, standby, or hibernate mode when you close(lower) the display: aClick the Windows Power icon in the Notification area to display the Power icon pop-up window. bClick More power options. cUnder the When I close the lid drop-down menu, select Do nothing. Securing the Media Base NOTE: If the Tablet-PC is docked to... »