Notice FOCAL 165 KRX3

« according to the placing of your loudspeakers (fig. A). For a use on a display shelf, we recommend the crossover settings as follow: tweeter level at 0dB, woofer in Flat mode and filtering slope at 18dB/oct. for the kits that have this function (fig. B). For any installation in your vehicle, please refer to the remainder of the user manual. Features Membrane K2 Power: New CMKV sandwich composite, including (Aramid fiber, foam, and structural glass fibre). Three individual materials, each with their own advantages, allow the cone to be extremely rigid, with continued low mass value, and increased damping characteristics, even when played loud. This ensures improved power handling, with detailed sound quality, low distortion even at high volume levels. Chassis made from Aluminum: Inherently rigid and non magnetic. Voice coil wound on Kapton former: Light-weight and highly durable material ensures no deformation of voice coil. Butyl moulded rubber surround suspension: Long life characteristics, even in the most extreme climates. TN53K with inverted tweeter dome: Inverted dome formed in aramid fiber material. Producing detailed high frequencies, acoustically rich and dynamic. Controlled with twin radius wave guides, for totally controlled staging and directivity. Crossover of high precision: Precise level adjustment of tweeter and medium available. High quality audiophile components used throughout. Large wire gauge connections included. Focal-JMlab® - BP 374 - 108, rue de l'Avenir - 42353 La Talaudière cedex - France - www.focal-fr.comTél. (+33) 04 77 43 57 00 - Fax (+33) 04 77 37 65 87 Dans un but d'évolution, Focal-JMlab se réserve le droit de modifier les spécifications techniques de ses produits sans préavis. Images non contractuelles. ©Focal-JMlab 0102 1 2 3 AB CD EFTweeter The TN 53k tweeter has been designed for flush mount or surface mount positioning, using the two fixing kits provided. The choice of install position is extremely important to deliver the best performance and maintain integration into the system. This is a major factor for high frequency SPL, and the the stability of the acoustics, stereophonic imaging, and overall staging. Please check the drawing to understand this further. The standard recommendation for ideal stereo imaging, is to ensure the tweeters “left” and “right”, are installed in the same positions. Also they are approximately at equal distance to the driver (vice-versa for the passenger). The various positions advised should be verified and comparatives made, for ideal positioning. The tweeter should always be positioned ahead of the normal listening position. The main prefe- rences are the outer positions of the dash board (pic. C, 1), close to the windshield (pic. C, 2). Normally easy for installation. The location close to the door mirror (pic. C, 3) is also regarded as a good position, and normally only requires a small amount of install work. Woofer-midrange K2 Power woofer-midranges, posi- tioned ideally high in the doors (pic. D, 1), produce optimal midrange frequencies, thus integrating better into the rest of the system. If the woofer-mids are positioned low in the doors (pic. D, 2), the loss of midrange can be compensated by adjusting the crossover (see section “adjustment” page 7-8). The woofer-mids from the K2 Power rang... »