Notice FOCAL BUS 25

Notice FOCAL BUS 25

Mode d'emploi FOCAL BUS 25 disponible.

Groupe d'entraide des utilisateurs FOCAL BUS 25

Bienvenue dans le groupe d'entraide des utilisateurs
FOCAL BUS 25

Le groupe d'entraide FOCAL BUS 25 vous donne des conseils d'utilisation, solutions aux problèmes de fonctionnement, entretien et assistance pour votre Haut-parleur auto. Rejoignez GRATUITEMENT notre groupe d'entraide BUS 25 pour vous aider à mieux utiliser votre Haut-parleur auto FOCAL. Le SAV entre consommateurs donne accès à différents services pour votre FOCAL BUS 25 : accès à la notice BUS 25 et mode d'emploi pdf, manuel d'utilisation en français, avis consommateur et forum actif. Soyez le premier membre actif de ce groupe d'entraide.

FOCAL BUS 25

Dernières actualités du groupe d'entraide FOCAL BUS 25

Nouvelles questions du forum

Nouveaux avis

Nouveaux membres

  • nogopet376  depuis le 14/12/2020 - Expertise (non renseigné) - Utilisateur depuis (non renseigné)
  • Gigimontana  depuis le 27/04/2019 - Expertise débutant - Utilisateur depuis plus de 5 ans

Documentation disponible sur votre produit

Notice disponible après inscription gratuite au groupe d'entraide

Manuel/Notice/Mode d'emploi | 406 K | Français

Pas de lien disponible

Pas de vidéo disponible

« o below 5°C. • The location must also be dry and well-ventilated. • The supply voltage requirement is 12VDC (13.8VDC) with the negative connection grounded. Please make sure that the characteristics of your vehicle correspond with this requirement before connecting the equipment. • For safe driving, we recommend that you operate your sound equipment at a listening level that does not drown out traffic noise. Warning! The performance of the Bus 20 and Bus 25 (Bomba under seat) allows high sound pressure levels to be generated. We remind you that sustained listening beyond 110dB SPL can permanently and irreversibly damage your hearing. We recommend that you adjust the level of your equipment correspondingly. For safety reasons, it is essential that you securely fix the subwoofer enclosure in the boot (make sure you do not drill through the petrol tank if you fix it with screws). Supplied elements • 1 remote control with 5m (16Ft) cable • 1 user manual • 4 fixing clamps • 4 screws M4*20 • 4 screws M6*8 • 1 power supply kit that contains 5m (16Ft) cable for the remote 0.5 mm2 (20 AWG) (blue and white) 5m (16Ft) cable for high level input 4 x 0.5 mm2 (4 x 20 AWG) (grey) 5m (16Ft) cable for the battery 3.3 mm2 (12 AWG) (yellow) 1,40m (4,5Ft) cable for the ground 2 x 1.3 mm2 (2 x 16 AWG) (black) 1 10A fuse placed in the fuse box Cable routing The 12V supply cables should be passed down on one side of the vehicle and the signal cables down the other. These cables must be suitably protected to avoid any damage to insulation, especially when feeding the cable through from the engine compartment to the passenger cabin. notice_Bus20_Bus25.indd 2notice_Bus20_Bus25.indd 220/12/07 14:59:4720/12/07 14:59:473BUS 20 & BUS 25 User Manual Installation We included a fixing kit to ensure the subwoofer remains securely mounted. Two types of installation are possible. In the trunk 1 - Rear seats must be positioned in their normal fixed position. 2 - Decide the best location possible that suits your automobile and space available. The best and most secure location for optimum sound quality is behind the rear seats, in the trunk floor. 3 - Ensure the area for subwoofer location is clean and tidy. Any loose objects must be removed, as they could knock and damage the subwoofer. 4 - Once the location has been decided, mark the screw hole positions for the fixing brackets. 5 - Drill holes of 2 mm for the 4 fixing brackets, at your defined locations. 6 - Fix the clamps to the subwoofer basket with the four screws M6*8 (the fixing clamps have a mounting direction system). 7 - Position the subwoofer so that the holes correspond to the M4*20 supplied screws and fix it. 8 - Please make sure the subwoofer is tightly fixed. Under a seat 1 - The seat must be positioned in its normal fixed position. 2 - Decide the best location possible that suits your automobile and space available, checking that the enclosure doesn’t hamper the seat mobility. 3 - Ensure the area for subwoofer location is clean and tidy. Any loose objects must be removed. 4 - Once the location has been decided, mark the screw hole positions for the fixing brackets. 5 - Drill holes of 2 mm for the 4 fixing brackets, at your defined locations. 6 - Fix the clamps to the subwoofer basket with the four screws M6*8 (the fixing clamps have a mounting direction system) 7 - Position the subwoofer so th... »

En cours...