Notice HOOVER TCR 4234

« – Neutral Brown – Live STATIC ELECTRICITY: Some carpets can cause a small build up of static electricity. Any static discharge is not hazardous to health. AFTER USE: Switch the cleaner o? and remove the plug from the electricity supply.Always switch o? and remove the plug before cleaning the appliance or attempting any main-tenance task. SAFETY WITH CHILDREN, ELDERLY OR THE INFIRM: Do not let children play with the ap-pliance or its controls. Please supervise the use of the appliance by older children, the elderly or the in?rm.” HOOVER SERVICE: To ensure the continued safe and e?cient operation of this appliance we recommend that any servicing or repairs are only carried out by an authorised Hoover service engineer. Position the cleaner above you when cleaning the stairs.• Use your cleaner out of doors or on any wet surface or for wet pick up.• Pick up hard or sharp objects, matches, hot ashes, cigarette ends or other similar items.• Spray with or pick up flammable liquids, cleaning fluids, aerosols or their vapours as this • may cause risk of fire / explosion. Run over the supply cord when using your cleaner or remove the plug by pulling on the • supply cord. Stand on or wrap the power cord around arms or legs when using the cleaner.• Use the appliance to clean people or animals.• Continue to use your cleaner if it appears to be faulty. If the supply cord is damaged stop • using the cleaner IMMEDIATELY. To avoid a safety hazard, an authorised Hoover service en- gineer must replace the supply cord. Remove all components from the packaging. Connect the hose to the cleaner main body, ensuring it clips and locks into position. To 1. release: simply press the two buttons on the hose end and pull. [2] Connect the tube upper end to the handle, and store the 3in1 tool underneath the han-2. dle. [3] Connect the tube lower end to the carpet and ?oor nozzle. 3. [4] Cleaner main bodyA. Dust ContainerB. Dust Container handleC. On/O? ButtonD. Cord Rewind ButtonE. Dust Container Release ButtonF. Dust Container Door Release TriggerG. HEPA/ Foam Filter PackH. Park slotI. HandleJ. Power Control RegulatorK. Telescopic TubeL. Telescopic tube adjusterM. Carpet & Floor NozzleN. Carpet Care Control SelectorO. HoseP. 3 in 1 Tool: Q. Qa. Crevice Tool Qb. Furniture Nozzle Qc. Dusting Brush Suction RegulatorR. Pet Hair Remover Mini Turbo Nozzle*S. Allergen Remover Mini Turbo Nozzle*T. Grand Turbo Nozzle*U. Parquet Caresse Nozzle*V. (*Certain Models Only) rush_48000513__1-4-gb.indd 115-07-2009 12:57:032 GB USING YOUR CLEANER ACCESSORIES Extract power cord and plug it into the power supply. Do not pull the cord beyond the 1. red marker. [5] Adjust the telescopic tube to the desired height by moving the telescopic release button 2. up and raise or lower the handle to the most comfortable cleaning position. [6] Select carpet care control height by pressing the pedal in the nozzle. 3. [7] Hard Floor – Brushes are lowered to protect the ?oor. Carpet – Brushes are raised for the deepest clean. Switch the cleaner on by pressing the On/O? Button on the cleaner main body. 4. [8] Adjust the power control regulator to the desired level. 5. [9] Adjust the suction regulator to the desired level. 6. [10] Switch o? at the end of use by pressing the On/O? Button. Unplug and press the cord 7. rewind button to wind the power cord back into the cleaner.... »