Notice HOOVER TSE 0105

« upply. Always switch off and remove the plug before cleaning the appliance or attempting any maintenance task. SAFETY WITH CHILDREN, ELDERLY OR THE INFIRM: Do not let children play with the appliance or its controls. Please supervise the use of the appliance by older children, the elderly or the in?rm.” HOOVER SERVICE: To ensure the continued safe and ef?cient operation of this appli- ance we recommend that any servicing or repairs are only carried out by an authorised Hoover service engineer. imporTAnT ThAT yoU Do noT: position the cleaner above you when cleaning the stairs.• Use your cleaner out of doors or on any wet surface or for wet pick up.• Pick up hard or sharp objects, matches, hot ashes, cigarette ends or other • similar items. Spray with or pick up flammable liquids, cleaning fluids, aerosols or their vapours • as this may cause risk of fire / explosion. run over the supply cord when using your cleaner or remove the plug by pulling • on the supply cord. Stand on or wrap the power cord around arms or legs when using the cleaner.• Use the appliance to clean people or animals.• Continue to use your cleaner if it appears to be faulty. If the supply cord is damaged • stop using the cleaner IMMEDIATELY. To avoid a safety hazard, an authorised Hoover service engineer must replace the supply cord. ASSEMBLING YOUR CLEANER Connect hose to cleaner main body, as shown in • [1] Connect tube upper end to handle, as shown on • [2] Connect floor nozzle to lower tube end, as shown in • [3] USING YOUR CLEANER power Supply - Extract cord fully and plug it into a power supply 1. [4]. navigator Smart Control - For outstanding ease of use, grip the handle as shown2. [5]. To adjust the length of the telescopic tube hold the nozzle in place with your foot, pull the telezoom trigger and raise or lower the handle to the most comfortable cleaning position. [5]. Carpet & Floor Nozzle. Press the pedal on the nozzle 3. [6] to select the ideal cleaning mode for the ?oor type. hard Floor: The brushes are lowered to protect the ?oor Carpet: With lifted brushes for the deepest clean Turn the cleaner on by pressing the On/Off button on the Navigator Smart Control 4. handle [7]. Adjust the power setting. The cleaner is equipped with 3 cleaning programs ideals to 5. achieve better performances in every use conditions; select the cleaning programme on the Navigator Smart Control handle [8] to suit the surface to be cleaned. The cleaner is setted on Silent Energy programme optimized for everyday cleaning Turbo Power - for stubborn dust or harsh surfaces. Silent Energy - high dust pick up ideal for every day cleaning. Soft - ideal for delicate surfaces like curtains or beds Switch off at the end of use by reversing the action to switch on. Unplug then gently 6. pull the power cord out of the cleaner [4] and the cord will then begin to automatically retract back into the cleaner. parking and Storage - The tube can be parked for temporary storage while in use 7. [9], or in the storage position when not in use [10]. GB2 CLEANER MAINTENANCE Replacing The Dust Bag if the bag check indicator ?ashes please check and, if necessary, replace the bag [11]. Press the button 1. [12] to open the cover and pull the bag collar to remove the bag. The full dust bag should be disposed of correctly and carefully (p13). Fold a ne... »