Notice FUJITSU Siemens ScaleoView A22W-3

« 55.8 cm (22”) Screen size : 473.76 mm x 296.1mm Dimensions (W x H x D) incl. monitor base : 514 mm x 416 mm x 213.6 mm Dimensions box (W x H x D): 560 mm x 140 mm x 490 mm Weight : approx. 5.6 kg / 7.5 kg Dot pitch : 0,282 mm Maximal resolution : 1680 x 1050 pixels Electical data Video: analogue, positiv, 0.7 Vpp, 75 O, digital, DVI-D Synchronisation : Seperate Synch. TTL, positive or negative Horizontal frequency: 30 kHz …. 82 kHz Refresh rate: 50 Hz …. 75 Hz Maximum pixel rate: 168 MHz Power supply: switches automatically 100 V – 240 V, 50 Hz – 60 Hz, 1.0 A max. Total power consumption: < 55 W < 2 W in the energy-saving mode Environmental conditions Environment class 3K2, IEC 721 Operating range: 5 °C …. 35° C Humidity: 20 % …. 85 % Condensation must be avoided. Preset operating modes The picture position and size have been set set to optimum values at the factory for the operating modes listed above. Horizontal frequency Refresh rate Display resolution 31.5 kHz 31.5 kHz 37.5 kHz 37.9 kHz 46.9 kHz 48.4 kHz 60.0 kHz 64.0 kHz 79.9 kHz 56.0 kHz 70.6 kHz 65.3 kHz 70 Hz 60 Hz 75 Hz 60 Hz 75 Hz 60 Hz 75 Hz 60 Hz 75 Hz 60 Hz 75 Hz 60 Hz 720 x 400 640 x 480 640 x 480 800 x 600 800 x 600 1024 x 768 1024 x 768 1280 x 1024 1280 x 1024 1440 x 900 1440 x 900 1680 x 1050 Dieses Handbuch wurde erstellt von cognitas. Gesellschaft für Technik-Dokumentation mbH – www.cognitas.de Herausgegeben von/Published by Fujitsu Siemens Computers GmbH Printed in China AG 1106 11/06 Ausgabe/Edition 1 Bestell-Nr./Order No.: A26361-K1155-Z200-1-M119 Edition 1 Using the Display Turning On the Display Turn on the display before turning on the computer. When the power is on, the LED on the power button lights blue and the screen image will appear after about 10 seconds. If the LED doesn’t light blue or no image appears, please verify if the display is properly connected. Function Controls 1,2 Decrease Button Increase Button OSD Off: Press directly to “Mute” and recover ” Press select input source. OSD On: Use these buttons to adjust the values of a selected function. 3 MENU OSD Function Enters / Exits OSD 4 AUTO Auto Adjustment Button OSD Off: Executes auto adjustment function. OSD On: Confirms an OSD selection. 5 POWER Power Switch Power On/Off Blue-Operation mode / Orange-Power saving mode OSD Selection After you press the MENU button to enter the OSD menu, use to select the items you want to adjust. Then press the AUTO button. After the screen fonts turn from black to blue you may start to make the adjustments. Just use to adjust the screen parameters as required. If no action is taken for 45 seconds after the setting, the system will automatically save your settings and exit the OSD. OSD Menu Brightness/Contrast adjustment: Brightness: Adjusts brightness by using the buttons or (1and 2). Contrast: Adjusts screen contrast by using the buttons or (1and 2) Black level: Adjusts screen contrast by using the buttons or (1and 2) Auto level: Adjusts screen contrast by using the buttons or (1and 2) Image Adjust: Auto Adjustment... »