Notice FUJITSU Siemens ScaleoView D22W-1

« NAL SELECT * Select the input signal from Analog, or Digital Inputs (Optional). OSD MENU LANGUAGE * Select your own preference of language of OSD menu. DISPLAY RATIO * Select the display ratio from Native, and Full Screen * Full Screen: adjust and enlarge the display screen to full screen size (16:10) * Native: keep the display format as the input signal (4:3, 5:4, etc), and enlarge the display screen to the maximum w/o losing any content (part of the screen may be blank) COLOR TEMPERATURE * Select the setting of screen color-Cool, Warm or User.* Cool: Select the setting of screen color to be bluish white.* Warm: Select the setting of screen color to be reddish white. SYSTEM * Adjust the mechanical specifications regarding the display.(Power Saving Mode, White Balance, Clock, Phase, Horizontal Position, Vertical Position, Information) POWER SAVINGMODE * Select between Standard and Advanced power saving modes. See addendum for details. * Standard: Fulfill EPA Energy Star power management requirement * Advanced: Activate monitor Life-Extension function WHITE BALANCE * Adjust the balance of the input signal. HORIZONTAL POSITION * Shift the screen left or right VERTICAL POSITION * Shift the screen up or down PHASE * Adjust the monitor internal signal phase CLOCK * Adjust the monitor internal sampling clock rate DDC/CI * Select turn on or turn off DDC/CI function ACR * Select turn on or turn off ACR function DEMO * 2 seconds after activation of this function, some of the menus will stimulate feature- grading effects 2 times over. INFORMATION * Show the frequency, resolution, input interface and other operating details about this display. RECALL * Reset monitor parameters back to factory preset values. Technical data Dimensions and weight (LCD monitor) Visible diagonals: 558.7 cm ( 22 ''wide) Screen size : 473.8mm x 296.1mm Dimensions (W x H x D) incl. monitor base : 510 x 423mm x 225mm Dimensions box (W x H x D): 569 mm x 481 mm x 130 mm Weight : 4.94 kg / 6.77kg Dot pitch : 0.282 mm Maximal resolution : 1680 x 1050 pixels Electrical data Video: analogue, positive, 0.7 Vpp, 75 Ohm, (digital), DVI-D) Synchronisation : Separate H/V-sync Horizontal frequency: 31.5 kHz ~83 kHz Refresh rate: 56 Hz ~ 76 Hz Maximum pixel rate: 146.25 MHz Power supply: AC 100~240V, 50~60Hz Total power consumption: < 55 W < 2 W (standby) Environmental conditions Environment class 3K2, IEC 721 Operating range: 5°C~ 35°C Humidity: 10 % ~85 % Condensation must be avoided. Preset operating modes The picture position and size have been set set to optimum values at the factory for the operating modes listed above. Display resolution Refresh rate Horizontal frequency 640 x 480 640 x 480 720 x 400 800 x 600 800 x 600 1024 x 768 1024 x 768 1280 x 1024 1280 x 1024 1440 x 900 1680 x 1050 60Hz 75 Hz 70 Hz 60Hz 75 Hz 60Hz 75 Hz 60Hz 75 Hz 60Hz 60Hz 31.5kHz 37.5kHz 31.5kHz 37.9kHz 46.9 kHz 48.4 kHz 60 kHz 64 kHz 80 kHz 59.9kHz 65.3kHz 22" LCD Monitor Getting Started Deutsch Magyar ??????? English ????????? Norsk Français Româna Eesti keeles Español Türkçe ???????? Português WEEE Lietuviškas Italiano Latviski Svenska Polski Nederlands Sloven... »