Notice FUJITSU Siemens ScaleoView L19W-9

« Technical data Dimensions and weight (LCD monitor) Visible diagonals: 48 cm (19”) Screen size : 408mm x 255mm Dimensions (W x H x D) incl. monitor base : 359 mm x 422 mm x 206 mm Dimensions box (W x H x D): 505mm x 420 mm x 140 mm Weight : unpacked/packed approx. 4.40 kg / 5.74 kg Dot pitch : 0,2835 mm Maximal resolution : 1440 x 900 pixels Electrical data Video: analogue, positiv, 0.7 Vpp, 75 O, digital, DVI(optional) Synchronisation : Seperate Synch. TTL, positive or negative Horizontal frequency: 31 kHz …. 81 kHz Refresh rate: 56 Hz …. 75 Hz Maximum pixel rate: 165 MHz Power supply: switches automatically 100 V – 240 V, 50 Hz – 60 Hz, 1.0 A max. Total power consumption: < 50 W (power on) < 1 W (power saving) Environmental conditions Environment class 3K3, IEC 721 Operating range: 5 °C …. 40° C Humidity: 20 % …. 85 % Condensation must be avoided. Preset operating modes The picture position and size have been set set to optimum values at the factory for the operating modes listed above. Display resolution Refresh rate Horizontal frequency 720 x 400 640 x 480 640 x 480 800 x 600 800 x 600 1024 x 768 1024 x 768 1280 x 1024 1280 x 1024 1440 x 900 1440 x 900 70 Hz 60 Hz 75 Hz 60 Hz 75 Hz 60 Hz 75 Hz 60 Hz 75 Hz 60 Hz 70 Hz 31.5 kHz 31.5 kHz 37.5 kHz 37.9 kHz 46.9 kHz 48.4 kHz 60.0 kHz 64.0 kHz 79.9 kHz 56.0 kHz 70.6 kHz Using the Display Turning On the Display Turn on the display before turning on the computer. When the power is on, the LED on the power button lights blue and the screen image will appear after about 3 seconds. If the LED doesn’t light blue or no image appears, please verify if the display is properly connected. Function Controls Hot key & Down / Decrease & Up / Increase OSD Off: Press ? “Mute” and “recover”. (hold for 1.5 sec) Press ? open input select menu(dual model). (hold for 1.5 sec) OSD On: Use these buttons to select or adjust the values of the selected function. 1,2 ?? Power-Button lock Operating of ? and ? buttons at the same time for approx. 2 seconds. 3 MENU Hot key & SELECT OSD Off: Open OSD. OSD On: Select function. (submenu) 4 AUTO Hot key & EXIT OSD Off: Auto adjustment function. (hold for 1.5 sec) OSD On: Exits OSD. 5 POWER Power Switch Power On/Off Blue-Operation mode / Orange-Power saving mode. 3,5 MENU & POWER OSD lock function Operating of menu and power buttons at the same time OSD Selection After you press the MENU button to enter the OSD menu, use ?? to select the items you want to adjust. Then press the AUTO button. After the screen fonts turn from black to blue you may start to make the adjustments. Just use ?? to adjust the screen parameters as required. If no action is taken for 30 seconds (default value but adjustable in OSD setup) after the setting, the system will automatically save your settings and exit the OSD. OSD Menu Brightness/Contrast: Brightness: Adjusts brightness by using the buttons ? or ? Contrast: Adjusts contrast by using the buttons ? or ? Bla... »