Notice FUJITSU Siemens ScenicView A19-3

« nical data 17” LCD Monitor 19” LCD Monitor Dimensions and weight (LCD monitor) Visible diagonals: 43 cm 48 cm Screen size : 338 mm x 270 mm 376 mm x 301 mm Dimensions (W x H x D) incl. monitor base : 372 mm x 378 mm x 214 mm 410 mm x 406 mm x 214 mm Dimensions box (W x H x D): 422 mm x 425 mm x 128 mm 460 mm x 462 mm x 127 mm Weight(with packaging) : approx. 4,8 kg approx. 6,1 kg Dot pitch : 0.264 mm 0,294 mm Maximal resolution : 1280 x 1024 pixels 1280 x 1024 pixels Electical data Video: analogue, positiv, 0.7 Vpp, 75 O ; digital, DVI(optional) Synchronisation : Seperate Synch. TTL, positive or negative Horizontal frequency: 30kHz …. 81 kHz Refresh rate: 55Hz …. 76Hz Maximum pixel rate: 135 MHz Power supply: switches automatically 100 V – 240 V, 50 Hz – 60 Hz, 1.0 A max. Total power consumption: < 32 W in normal mode (17”) < 37 W in normal mode (19”) < 1 W in the energy-saving modes (standby mode, suspend mode and Off mode) Environmental conditions Environment class 3K2, IEC 721 Operating range: 5 °C …. 35° C Humidity: 20 % …. 85 % Condensation must be avoided. Preset operating modes The picture position and size have been set set to optimum values at the factory for the operating modes listed above. Horizontal frequency Refresh rate Display resolution 31.5 kHz 31.5 kHz 37.5 kHz 37.9 kHz 46.9 kHz 48.4 kHz 60.0 kHz 64.0 kHz 80.0 kHz 70 Hz 60 Hz 75 Hz 60 Hz 75 Hz 60 Hz 75 Hz 60 Hz 75 Hz 720 x 400 640 x 480 640 x 480 800 x 600 800 x 600 1024 x 768 1024 x 768 1280 x 1024 1280 x 1024 Using the Display Turning On the Display Turn on the display before turning on the computer. When the power is on, the LED on the power button lights blue and the screen image will appear after a few seconds. If the LED doesn’t light blue or no image appears, please verify if the display is properly connected. 1 2 3 4 5 Function Controls Hot key & Down / Decrease & Up / Increase OSD Off: Press ? “Mute” and “recover”. Press ? open input select menu(dual model). Press ? open brightness menu(analog only model). OSD On: Use these buttons to select or adjust the values of the selected function. 2,3 ?/ ?/ INPUT Power-Button lock Operating of ? and ? buttons at the same time for a few seconds. 1 SELECT/MENU Hot key & SELECT OSD Off: Open OSD. OSD On: Select function. (submenu) 4 EXIT/AUTO Hot key & EXIT OSD Off: Auto adjustment function. OSD On: Exits OSD. 5 Power Switch Power On/Off . Blue-Operation mode / Orange-Power saving mode. 1,5 MENU &... »