Notice FUJITSU Siemens ScenicView E17-6

« diagonals: 43 cm (17”) Screen size : 338 mm x 270 mm Dimensions (W x H x D) incl. monitor base : 377 mm x 392 mm x 176 mm Dimensions box (W x H x D): 421 mm x 424 mm x 152 mm Weight : approx. 4,9 kg Dot pitch : 0,264 mm Maximal resolution : 1280 x 1024 pixels Electrical data Video: analogue, positive, 0.7 Vpp, 75 ? Synchronisation : Seperate Synch. TTL, positive or negative Horizontal frequency: 30 kHz …. 81 kHz Refresh rate: 55 Hz …. 76 Hz Maximum pixel rate: 135 MHz Power supply: switches automatically 100 V – 240 V, 50 Hz – 60 Hz, 0.9 A max. Total power consumption: < 45 W < 2 W in the energy-saving modes (standby mode, suspend mode and Off mode) Environmental conditions Environment class 3K2, IEC 721 Operating range: 5 °C …. 35° C Humidity: 20 % …. 85 % Condensation must be avoided. Preset operating modes The picture position and size have been set set to optimum values at the factory for the operating modes listed above. Horizontal frequency Refresh rate Display resolution 31.5 kHz 31.5 kHz 37.5 kHz 37.9 kHz 46.9 kHz 48.4 kHz 60.0 kHz 64.0 kHz 79.9 kHz 70 Hz 60 Hz 75 Hz 60 Hz 75 Hz 60 Hz 75 Hz 60 Hz 75 Hz 720 x 400 640 x 480 640 x 480 800 x 600 800 x 600 1024 x 768 1024 x 768 1280 x 1024 1280 x 1024 USER CONTROLS Front Panel Controls 1.Power Switch:To turn ON or OFF the power. 2.Power LED:Lights up to indicate the power is turned ON. 3.Select MENU:To exit and enter OSD menu. 4.Select :To move downward in the OSD Item. :To enter the digital video mode menu,and choose the different digital video mode which has independent brightness control when OSD is not displayed. 5.-:To decrease the value of the parameter in the OSD, which has been selected for adjustment. -:Choose the previous OSD MENU page. :Act as Speaker ON/OFF hot key when OSD is not displayed. 6.+:To increase the value of the parameter in the OSD, which has been selected for adjustment. +:Choose the next OSD MENU page. +(AUTO):Act as AUTO adjustment hot key when OSD is not displayed. 126543 T17AAS OSD page.p65 2007/1/23, ?? 08:151Basic Sections of a OSD Screen i i i i 1280 x 1024 75Hz i i 255 255 255--- + + + 5000K 6500K 7500K 8200K 9300K OSD Left/Right OSD Turn Off OSD Down/Up Volume Brightness Contrast Auto Contrast Red Green Blue H. Size Fine Left/Right Down/Up Auto Adjust Auto Adjust Proceeding... Factory Preset Language D-SUB D-SUB No Signal Check Video Cable Standard Text Movie Gaming Photo Sport D-SUB T17AAS OSD page.p65 2007/1/23, ?? 08:152Standard OSD Operation 1.Press MENU key to activate the OSD menu, when OSD is not displayed. 2.Use Select key to move down through the menu cyclically. The parameter will be highlighted when selected. 3.Then use + or - to increase or decrease the value of the parameter, or make selection between different options. 4.To quit the OSD screen at any time during the operation, press MENU key. If no keys are pressed for a time period, the OSD automatically disappears. 5.When OSD is not displayed, press + key to start Auto-Adjust. 6.When OSD is not displayed, press - key to turn speaker ON/ OFF. 7.When OSD is not displayed, press key to enter the digital video mode menu, and choose the different digital video mode which has independent brightness control. O... »