Notice HONEYWELL HZ-821E

« radio and television interference. 3.Keep combustible materials such as furni- ture, pillows, bedding, papers, clothes and curtains at least 90 cm from the heater. 4.Extreme caution is necessary when any heater is used by or near children. 5.Always unplug the heater when not in use. Do not pull on the cord when discon- necting it. 6.Do not cover.Ifcovered,thereisafire risk. 7.DO NOT use this heater in the immediate surroundings of a bath, a shower or a swimming pool. 8.This heater must not be located immedi- ately below an electrical socket-outlet. 9.If the supply cord of this appliance is damaged it must be replaced by a repair shop appointed by the manufacturer, be- cause special purpose tools are required. 10.Keep this heater clean. DO NOT allow objects to enter any ventilation or exhaust opening as this may cause electric shock, or fire, or damage the heater. 11.Do not operate the unit before it is com- pletely assembled according to the assem- bly instructions. ASSEMBLY INSTRUCTIONS • This heater may be used with feet on the floor or attached directly to the wall. • For floor use, attach the feet to the lower part of the heater by snapping each foot in- to the matching holes (fig. 1). • Firmly press each foot until a “click” is heard. Place the heater on a firm, level, open surface at least 90 cm away from any other object. DO NOT use on an unstable surface such as bedding or deep carpeting. • For wall mounting, secure the wall attach- ment clips into the wall with the screws pro- vided. DO NOT install this heater in the im- mediate surroundings of a bath, a shower or swimming pool. • Attach the wall spacers on the back of the heater to keep the minimum distance to the wall. Attach the heater to the mounting clips, using the mounting holes on the back of the heater (fig.2). OPERATION INSTRUCTIONS A) MODEL HZ-820E • Turn the thermostat anticlockwise to its low- est setting (d). • Plug in the heater. • Turn the thermostat clockwise to the highest temperature setting, for a rapid warming (fig.3). • When the room reaches a comfortable tem- perature, turn the thermostat anti clockwise until the heater switches off. At this setting, the thermostat will automatically turn the heater on (the pilot light illuminates) and off (the pilot light goes out) to maintain the se- lected temperature. • To turn the heater off, turn the thermostat an- ti clockwise to the lowest setting (d) and un- plug the heater. B) MODELS HZ-821E, HZ-822E, HZ-825TE • Turn the switch to (0). • Plug the heater into an outlet. • Turn the switch to the desired power, (I-Low, II-Medium, III-High) (fig. 4). • Turn the thermostat clockwise to its highest setting for a rapid warming. • When the room reaches a comfortable tem- perature, turn the thermostat anticlockwise until the heater switches off. At this setting, the thermostat will automatically turn the heater on (the pilot light illuminates) and off (the pilot light goes out) to maintain the se- lected temperature. • To turn the heater off, turn the switch to the (0) position and unplug it. C) TURBO MODELS HZ-823FE, HZ-824FE AND HZ-826FTE ONLY. • Turn the switch to (0). • Plug the heater into an outlet. ENGLISH • Turn the switch to the desired power setting (I-Low., II-High, II-High with Turbo) (fig.5). • This model is equipped with a fast heating system, for a rapid warming. • To use in a conventional way, turn the switch... »