Notice TOSHIBA RAC 16 SW

« ause an injury or damage the unit. •Before cleaning the unit, turn off the main switch or the circuit breaker. •When the unit won’t be used for a long time, turn off the main switch or the circuit breaker. INDOOR UNIT DISPLAY 1Hi POWER (Green) 2FILTER (Orange) 3PRE.DEF or FAN-ONLY (Orange) 4TIMER (Yellow) 5OPERATION (Green/*Orange) 6RESET button * Orange : Auto Restart Operation PREPARATION BEFORE USE Preparing Filters 1.Open the air inlet grille and remove the air filters. 2.Attach the filters. (see detail in installation manual) Loading Batteries 1.Remove the cover. Insert 2 new batteries (AAA type) following the (+) and (–) positions. 2.Push RESET : Adjust the clock. 2.1Push CLOCK (adjust only). 2.2Press and : Set the current time. 2.3Press : Start the clock. 3.Place the cover back. Remote Control Location •Max. 7 m from the indoor unit AIRFLOW DIRECTION 1.Press : Move the louver in the desired vertical direction. 2.Press : Swing the air automatically and press again to stop. 3.For horizontal direction, adjust manually. Note: •Use only the button to move the louver. REMOTE CONTROL FUNCTION 1Infrared signal emitter 2Start/Stop button () 3Mode select button (MODE) 4Temperature button (TEMP.) 5Fan speed button (FAN) 6Auto louver button (SWING) 7Set louver button (FIX) 8On timer button (ON) 9Off timer button (OFF) !Sleep timer button (SLEEP) "Reserve button (SET) #Cancel button (CLR) $Memory and Preset button (PRESET) %Automatic operation button (AUTO) &High power button (Hi POWER) (Economy button (ECO) )Quiet button (QUIET) ~Comfort sleep button (COMFORT SLEEP) AUTOMATIC OPERATION (AUTO) To automatically select cooling, heating, or fan only operation and control fan speed and a louver 1.Press . 2.Press : Set the desired temperature. AUTOMATIC OPERATION (AUTO CHANGEOVER: A) To automatically select cooling, heating, or fan only operation 1.Press : Select A. 2.Press : Set the desired temperature. COOLING / HEATING / FAN ONLY OPERATION 1.Press : Select Cool , Heat , or Fan only . 2.Press : Set the desired temperature. Cooling: Min. 17°C, Heating: Max. 30°C, Fan Only: No temperature indication 3.Press : Select AUTO, LOW , LOW+ , MED , MED+ , or HIGH . DRY OPERATION (COOLING ONLY) For dehumidification, a moderate cooling performance is controlled automatically. 1.Press : Select Dry . 2.Press : Set the desired temperature. Hi POWER OPERATION To automatically control only room temperature, airflow and operation mode for faster cooling or heating operation (except in DRY, FAN ONLY and ON TIMER mode) 1.Press : Start and stop the operation. 2.Press : Set the desired temperature. ECO OPERATION To automatically control room temperature, fan speed and operation mode to save energy (except in DRY, FAN ONLY and ON TIMER mode) 1.Press : Start and stop the operation. Note:Under certain conditions, ECO mode may not provide adequate heating or cooling due to energy saving features. TEMPORARY / RESET OPERATION In case of the misplaced or discharged remote control •Pressing the TEMPORARY/RESET button, the unit can start or stop without using the remote control. TIMER OPERATION Setting the ON Timer 1.Press : Set the desired ON timer. 2.Press : Set the timer. 3.Press : Cancel the timer. Every timer allows the user to set both the ON & OFF timers and will be activated on a daily basis. Setting Combined Timer 1.Press : Set the ON timer. 2.Press : Se... »