Notice HP CQ521B

« traint from the carriage. 5. Close the cartridge access door. Remove the cardboard that secures the two-sided printing accessory (if present) English © 2010 Hewlett-Packard Development Company, L.P. Printed in [French] Printed in [English] *CQ521-90085**CQ521-90085* CQ521-900852 Do not connect the USB cable unless prompted by the software! (Windows® only) 5 4 3 Follow the Setup Wizard Connect and power on Connect the power cord and adapter.Press to turn on the HP Photosmart. Be sure to follow the instructions on the display as it guides you through setting up and connecting the HP Photosmart, including inserting ink cartridges and setting up a wireless network connection. For computers without a CD/DVD drive, go to www.hp.com/support to download and install the software. WiFi Protected Setup (WPS) – (Optional) This HP Photosmart supports WiFi Protected Setup (WPS) for easy one-button wireless setup. • During the setup, if you are prompted on the display for Wi-Fi Protected Setup (WPS), and your router supports this method, press the WPS button on the router. If the connection is successful, the wireless light on the Wireless button will turn on. • Alternatively, you can follow the setup wizard on the printer display to connect using another wireless setup method. Register your HP Photosmart Get quicker service and support alerts by registering at www.register.hp.com. Install the faceplate If you need to install a faceplate on the control panel: 1. Remove the existing faceplate by pulling up on the right edge. 2. Position the new faceplate over the buttons on the control panel. 3. Press down ?rmly on all edges of the faceplate until it snaps into place. Install faceplate, if included English3 Setup troubleshooting If the HP Photosmart doesn’t turn on... 1. Check the power cord. •Make sure the power cord is ?rmly connected to both the printer and the power adaptor. A light on the power supply will be on if the power cord is working. •If you are using a power strip, check that the power strip is turned on. Or, plug the printer directly into a power outlet. •Test the power outlet to make sure that is working. Plug in another appliance that you know works, and see if it has power. If not, there may be a problem with the power outlet. •If you plugged the printer into a switched outlet, check that the outlet is turned on. 2. Turn off the printer, and then unplug the power cord. Plug the power cord back in, and then press the button to turn on the printer. 3. Take care not to press the button too quickly. Press it only once. It might take a few minutes for the printer to turn on, so if you press the button more than once, you might be turning off the printer. 4. If you have completed all the above steps, but are still having a problem, contact HP support for service. Go to www.hp.com/support. If you are unable to print...Make sure that your HP Photosmart is set as the default printer and not of?ine. To do this: •On the Windows taskbar, click Start. •Then click Control Panel. •Then open: •Devices and Printers (Windows 7) •Printers (Vista) •Printers and Faxes (XP) Look for your printer to see if it has a check mark in a circle next to it. If not, right-click the printer icon and choose Set as default printer from the menu. To check that your printer is not off-line, right-click the printer icon and ensure that Use... »