Notice D-LINK DCS-930L

Notice D-LINK DCS-930L

Mode d'emploi D-LINK DCS-930L disponible.

Groupe d'entraide des utilisateurs D-LINK DCS-930L

Bienvenue dans le groupe d'entraide des utilisateurs
D-LINK DCS-930L

Le groupe d'entraide D-LINK DCS-930L vous donne des conseils d'utilisation, solutions aux problèmes de fonctionnement, entretien et assistance pour votre Webcam. Rejoignez GRATUITEMENT notre groupe d'entraide DCS-930L pour vous aider à mieux utiliser votre Webcam D-LINK. Le SAV entre consommateurs donne accès à différents services pour votre D-LINK DCS-930L : accès à la notice DCS-930L et mode d'emploi pdf, manuel d'utilisation en français, avis consommateur et forum actif. Soyez le premier membre actif de ce groupe d'entraide.

D-LINK DCS-930L

Dernières actualités du groupe d'entraide D-LINK DCS-930L

Nouvelles questions du forum

Nouveaux avis

Nouveaux membres

  • nogopet376  depuis le 15/12/2020 - Expertise (non renseigné) - Utilisateur depuis (non renseigné)
  • raymond00  depuis le 13/01/2019 - Expertise débutant - Utilisateur depuis plus de 5 ans

Documentation disponible sur votre produit

Notice disponible après inscription gratuite au groupe d'entraide

Manuel/Notice/Mode d'emploi | 534 K | Français
Manuel/Notice/Mode d'emploi | 4 927 K | Français

Pas de lien disponible

Pas de vidéo disponible

« mputer. The set-up wizard should start automatically. Make sure that your internet connection is active. (Do not plug in DCS-930 yet) SET-UP WIZARD Select your language from the list of options and follow the steps within the wizard to complete the set-up of DCS-930 aDVaNCeD set-UP (aCCess Via iP aDDress) To con?gure DCS-930 using a static IP, connect your DCS-930 directly to your computer's ethernet port using the ethernet cable provided. Ensure that your computer is also set to a static IP of address of type 192.168.0.x. Then connect the power cable on the DCS-930. The DCS-930 power light will display as solid red ?rst, then shortly turn to green. Then simply open a browser window and enter the IP address in the browser address ?eld: IP ADDRESS: http://192.168.0.20 USERNAME: admin PASSWORD: DCs-9304 ENGLISH teCHNiCal sUPPOrt United Kingdom (Mon-Fri) website: http://www.dlink.co.uk FTP: ftp://ftp.dlink.co.uk Home Wireless/Broadband 0871 873 3000 (9.00am–06.00pm, Sat 10.00am-02.00pm) Managed, Smart, & Wireless Switches, or Firewalls 0871 873 0909 (09.00am- 05.30pm) (BT 10ppm, other carriers may vary.) Ireland (Mon-Fri) All Products 1890 886 899 (09.00am-06.00pm, Sat 10.00am-02.00pm) Phone rates: €0.05ppm peak, €0.045ppm off peak times TROUBLESHOOTING set-UP aND CONFiGUratiON PrOBleMs 1. HOW DO I RESET My DCS-930 TO FACTORy DEFAULT SETTINGS? - Ensure the DCS-930 is powered on. - Push and hold a paperclip in the reset hole for 10 seconds, then release it. The camera will then reset to factory default settings. 2. HOW DO I CONFIGURE My DCS-930 WITHOUT THE CD? - Connect your PC to the router using an Ethernet cable. - Log on to D-Link support site http://support.dlink.com.tw. Download the Setup Wizard SE utility from the DCS-930 section under technical support. - Install and run Setup Wizard utility SE. - The default username is ‘admin’. The default password is blank. - If you have changed the password and can not remember it, you will need to reset the DCS-930 to set the password back to blank (leave the ?eld blank). If the DCS-930 cannot ?nd a DHCP server, the default IP address is http://192.168.0.20. 3. WHAT CAN I DO IF My DCS-930 IS NOT WORKING CORRECTLy? - Try using the wizard on the included CD. - To make sure your hardware is installed correctly, make sure that: • the front LED is lit solid green • your Internet connection is working • your router’s LAN & WAN connections are ok • your router supports UPnP® • your camera is on the same network as your PC • both your PC and camera have a working Internet connection - If your camera is still not working, check your router and make sure it is using the latest ?rmware. 4. I DO NOT HAvE A ROUTER. HOW DO I INSTALL My DCS-930? - Connect the camera directly to the computer’s Ethernet port. - Assign your computer a static IP address within the same range as the camera, such as 192.168.0.x. - Access and set up your camera via the default IP address of http://192.168.0.20. - For more information, please refer to the User Manual.DCs-9305 DEUTSCHLIEFERUMFANG PaCkUNGsiNHalt INSTALLATIONS-CD ENTHÄLT DEN SETUP-ASSISTENTEN UND TECHNISCHE HANDBÜCHER WIRELESS N HOME NETWORK CAMERA DCS-930 STROMADAPTER ADAPTER KAT5E ETHERNET KABEL ANSCHLUSS DER KAMERA AN IHREN ROUTER WÄHREND DES SETUP-VORGANGS Sollte eines dieser Teile fehlen, wenden Sie sich bitte an Ihren FachhändlerDCs-9306 DEUTSCH SETUP DES PRODUKTS... »

En cours...