Notice THRUSTMASTER Ferrari Wireless Gamepad 430 Scuderia

« tch (14) - OFF position = the gamepad is off (and doesn’t use up batteries). - ON position = the gamepad is on. “PC / PS3” USB selector (11) Must always be set to the correct position before connecting your receiver’s USB connector. MAPPING (7) and CONNECT (12) blue LEDs - Both LEDs are on = connection established between gamepad and receiver. - Both LEDs flash quickly = no connection between gamepad and receiver. - The MAPPING LED is off = the gamepad is in standby mode or powered off. - The MAPPING LED flashes slowly & continuously = please change batteries. THE CONNECTION BETWEEN THE GAMEPAD AND RECEIVER IS ESTABLISHED AUTOMATICALLY To force the connection in case of error: press the CONNECT button on the receiver and simultaneously press the L2 + R2 + MAPPING buttons on your gamepad. STANDBY MODE The gamepad switches off automatically: - After 5 minutes of inactivity - After 5 seconds in the event of error or loss of connection. To wake up your gamepad: press START or use the POWER ON/OFF switch (14). 3/12 PLAYSTATION® 3 INSTALLATION ON PLAYSTATION® 3 1. Set your receiver’s USB selector to the “PS3” position. 2. Connect the USB connector to USB port #1 on the console. 3. Switch on your console. 4. Switch on your gamepad using the POWER ON/OFF switch (14). 5. Once a connection has been established: start up your game. You are now ready to play! PLAYSTATION® 3 MODE “AUTOMATIC PRESET” CONFIGURATION - PLAYSTATION® 3 PS3 mode Red HOME button Here: “Optical wheel” associated with “Left/Right” direction on left mini-stick “Right trigger” associated with progressive “R2” button “Left trigger” associated with progressive “L2” button USING THE “HOME” BUTTON (6) Your gamepad’s “HOME” button allows you to exit games, access menus and directly switch off your PlayStation®3 system. IMPORTANT NOTES FOR PLAYSTATION® 3 - The USB selector on your receiver (11) must always be set to “PS3” before connecting the receiver. - In “1 Player” mode: If your official gamepad is powered on, you must switch it to “gamepad port 2” in order for your gamepad to be functional. - On PlayStation® 3, the gamepad is only compatible with PlayStation® 3 games (and will not work with PlayStation® 2 games) and does not feature a motion sensor. 4/12 PC INSTALLATION ON PC 1. Set the USB selector on the receiver (11) to the “PC” position. 2. Connect the receiver’s USB connector to one of your computer’s USB ports. Windows® will automatically detect the new device. 3. Switch on your gamepad using the POWER ON/OFF switch (14). 4. Click Start/Settings/Control Panel and then double-click Game Controllers. The Game Controllers dialog box displays the gamepad’s name with OK status. 5. In the Control Panel, click Properties to test and view the buttons, D-pad, mini-sticks, triggers and optical wheel. You are now ready to play! IMPORTANT NOTES FOR PC - The USB selector on your receiver (11) must always be set to “PC” before connecting the receiver. - The name of the gamepad displayed on PC (in the Control Panel and in games) is "Run N' Drive Wireless". - “Advanced Programming Software” for PC is also available for download on our website at the following address: http://ts.thrustmaster.com/ - The "Test forces" tab (of the advanced programming so... »