Notice THRUSTMASTER Wireless GT Cockpit 430

Notice THRUSTMASTER Wireless GT Cockpit 430

Mode d'emploi THRUSTMASTER Wireless GT Cockpit 430 disponible.

Groupe d'entraide des utilisateurs THRUSTMASTER Wireless GT Cockpit 430

Bienvenue dans le groupe d'entraide des utilisateurs
THRUSTMASTER Wireless GT Cockpit 430

Volant

Le groupe d'entraide THRUSTMASTER Wireless GT Cockpit 430 vous donne des conseils d'utilisation, solutions aux problèmes de fonctionnement, entretien et assistance pour votre Manette de jeu. Rejoignez GRATUITEMENT notre groupe d'entraide Wireless GT Cockpit 430 pour vous aider à mieux utiliser votre Manette de jeu THRUSTMASTER. Le SAV entre consommateurs donne accès à différents services pour votre THRUSTMASTER Wireless GT Cockpit 430 : accès à la notice Wireless GT Cockpit 430 et mode d'emploi pdf, manuel d'utilisation en français, avis consommateur et forum actif. Soyez le premier membre actif de ce groupe d'entraide.

THRUSTMASTER Wireless GT Cockpit 430

Dernières actualités du groupe d'entraide THRUSTMASTER Wireless GT Cockpit 430

Nouvelles questions du forum

Nouveaux membres

  • Titia35420  depuis le 24/01/2021 - Expertise (non renseigné) - Utilisateur depuis (non renseigné)
  • nogopet376  depuis le 15/12/2020 - Expertise (non renseigné) - Utilisateur depuis (non renseigné)

Les membres les plus actifs

  • labrosse, 5 contributions dans ce forum d'entraide

Documentation disponible sur votre produit

Notice disponible après inscription gratuite au groupe d'entraide

Manuel/Notice/Mode d'emploi | 4 244 K | Français

Pas de lien disponible

Pas de vidéo disponible

« p screws (1). 3/20 - Slightly unscrew (anticlockwise) the clamp screw (6) located at the front of the base’s column. Then draw out the column to the length you require. - Then tighten (clockwise) the clamp screw (6), taking care that it is correctly inserted into one of the holes provided for this purpose. You can do this simply by positioning the upper hole by the locating mark provided for this purpose. 4/20 FITTING THE WHEEL TO THE BASE Lugs (front of the base) Lug notches (back of the wheel) + Locking tab (back of the wheel) - Position the removable wheel (4) horizontally, and then insert the 2 lugs (on the front of the base) into the 2 lug notches (on the back of the wheel). - Let the wheel down vertically, and then lock the wheel into position by pressing the locking tab (on the back of the wheel) then releasing it until you hear a gentle “click”. - Check that the steering wheel is correctly secured to the base. 5/20 - Electronically connect the steering wheel to its base by connecting the elbow-shaped male connector (on the end of the power cord (5)) to the female connector (to the left of the wheel). - Rotate the nut (on the end of the connector) clockwise to secure the connection. PERFORM THE OPERATION IN REVERSE TO TAKE OFF THE REMOVABLE WHEEL FROM THE BASE 6/20 FITTING BATTERIES AND RECOVERING THE RECEIVER - Remove cover from the battery compartment (8) (located between the 2 pedals) and fit 4 LR6 / AA batteries, ensuring that the polarities are in the right position. - Recover the wireless receiver (14) found in the lower section of the battery compartment. - Fit back the battery compartment’s cover. 7/20 SWITCHING THE WHEEL ON OR OFF - Position the switch (located on the right-hand side of the wheel): - To ON for switching on the wheel. - To OFF for switching off the wheel. Important note: When you switch on your wheel, it must always be perfectly centred physically (to prevent any misalignment). 8/20 PLAYSTATION®3 INSTALLATION ON PLAYSTATION®3 1. Set the PC/PS3 switch (17) of the receiver (14) to the “PS3” position. 2. Connect the USB connector (15) of the receiver to the USB port 1 of the console. 3. Turn on your console. 4. Turn on your wheel by using the ON/OFF switch. 5. When the connection is set up, launch the game. You are now ready to play! USING THE “PS” BUTTON The “PS” button of your wheel allows you to exit your games, access the menus and directly switch off your PlayStation®3 system. Procedure: Set the Manettino (10) switch to the relevant icon, and then press the push button. Important notes on PlayStation®3: - The PC/PS3 switch (17) of the receiver must always be set to “PS3” before connecting it. - In “1-player” mode: If your official gamepad is turned on, you will have to switch it to “controller port 2” in order for your wheel to be functional. - On PlayStation®3, the wheel simulates the official gamepad (which makes it compatible with all racing games). - In most games, the “Normal Sensitivity” mode (just as on the gamepad) has a slight dead zone that can be felt in the middle of the wheel axis (and therefore the centre of the wheel). The wheel’s “High Sensitivity” mode is set to remove this dead zone. However, some games allow you to... »

Activité de ce groupe d'entraide

Note moyenne du groupe
3 étoiles
Durée moyenne d’utilisation
Avis consommateur
57 avis
Aucune opinion sur THRUSTMASTER
Donner votre opinion sur THRUSTMASTER
En cours...