Notice THRUSTMASTER T-Wireless 3 in 1

« ORS switch (13): - OFF position = vibration mode is disabled (uses less battery power). - ON position = vibration mode is enabled (uses more battery power). • CONNECT buttons (8 and 12) The connection between the gamepad and the receiver is established automatically. These 2 buttons allow you to establish a connection in case of failure or when using more than one T- Wireless gamepad at the same time. - Both LEDs are on = signal between the gamepad and the receiver. - Both LEDs flash quickly = no signal between the gamepad and the receiver. - Both LEDs are off = the gamepad is in standby mode or switched off. - Both LEDs flash slowly = change batteries. • STANDBY MODE: - The gamepad switches off automatically after 5 minutes of inactivity. - To reactivate it, press the START button. PLAYSTATION® 2 INSTALLATION ON PLAYSTATION® 2 1. Connect the receiver’s PS2 Gameport connector (9) to port number 1 on your console. 2. Switch on your console. 3. Switch on your gamepad using the POWER ON switch (13). 4. Start up your game. You are now ready to play! ATTENTION: NEVER CONNECT THE USB CABLE (10) TO YOUR PLAYSTATION® 2 (to avoid the risk of damaging your gamepad or your console) 3/6 PLAYSTATION® 3 INSTALLATION ON PLAYSTATION® 3 1. Connect the receiver’s USB connector (10) to USB port number 1 on your console. 2. Switch on your console. 3. Switch on your gamepad using the POWER ON switch (13). 4. Start up your game. You are now ready to play! USING THE “HOME” BUTTON (7) Your gamepad’s HOME button allows you to exit your game, access menus and directly switch off your PlayStation®3 system. IMPORTANT NOTES FOR PLAYSTATION® 3 - On PlayStation® 3, the T-Wireless gamepad is only compatible with PlayStation® 3 games (and will not function with PlayStation® 2 games). - Your T-Wireless gamepad does not include a motion sensor. - In “1 Player” mode: If your official gamepad is turned on, you must switch it to “gamepad port 2” in order for your T-Wireless gamepad to be functional. PC INSTALLATION ON PC 1. Connect the receiver’s USB connector (10) to one of your computer’s USB ports. Windows® XP or Vista will automatically detect the new device. 2. Switch on your gamepad using the POWER ON switch (13). 3. Click Start/Settings/Control Panel and double-click Game Controllers (or Gaming Options, depending on your operating system). The Game Controllers dialog box displays the gamepad’s name along with OK status. 4. In the Control Panel, click Properties to test and visualize the buttons, the D-Pad and the mini- sticks. You are now ready to play! 4/6 ADVANCED FUNCTIONS PROGRAMMING BUTTONS / MINI-STICKS / D-PAD All progressive buttons (on PS2 and PS3) or digital buttons (on PC), directions of the mini-sticks and of the D-Pad can be switched using the MAPPING button (6). • Examples of possible applications: - Switching the functions of buttons - Switching the 2 mini-sticks (in this case, you must map the 4 directions of the first mini-stick to the 4 directions of the second) - Switching the D-Pad with a mini-stick (in this case, you must map the 4 directions of the D-Pad to the 4 directions of the mini-stick in question). • Programming/switching procedure: Steps Action LED (11) (on gamepad) 1 Press and release the MAPPI... »