Notice SAGEM Photo Easy 160

« mat) mode 21 6PRINTING FROM A DIGITAL CAMERA (PICTBRIDGE MODE)22 Printing in PictBridge mode 23 7PRINTING FROM A MOBILE PHONE OR OTHER PERIPHERAL DEVICE24 Infrared transfer 24 Bluetooth transfer (optional) 26 8FUNCTION CRYSTAL IMAGE28 Activation/deactivation 28 9PRINTING FROM A PC29 10PROCESSING THE CONTENT OF THE MEMORY CARD FROM YOUR PC31 11REPLACEMENT OF CONSUMABLES33 Liasse AZUR_GB.book Page I Jeudi, 21. avril 2005 4:09 16- II - 12MAINTENANCE34 Cleaning the print head 34 Paper jam 35 Problems 36 Error messages 38 Technical data 40 13ENVIRONMENT41 14GUARANTEE42 Liasse AZUR_GB.book Page II Jeudi, 21. avril 2005 4:09 16- 1 - ENGLISH DEUTSCH ESPAÑOL ITALIANO NEDERLANDSPORTUGUÊS FRANÇAIS 1WELCOME Thank you for purchasing our new photo printer. With this high quality printer you can get the most out of your digital photos. In a few simple steps you can produce photo prints identical to those from a professional developer, for your personal use or to share with friends and family. Your photo printer has slots for all types of memory card and hooks up directly to digital cameras. Its Crystal Image picture optimisation guarantees perfect printing and reproduction quality for your photos. With Crystal Image, you can also correct red-eye on photos taken with a flash. This user guide takes you in easy steps through: • Setting up your photo printer. • Printing photos from a flash card. • Printing from a digital camera. • Printing photos transferred from a mobile phone or other device. • Installing the image processing software and print driver on your PC. • Keeping your photo printer in good working order and solving any problems. The CD-ROM included with your kit contains an additional guide with instructions for using the image processing software and printer driver on your PC. You can also find at the www.sagem.com website: • software upgrades. • answers to Frequently-Asked Questions (FAQ). • a list of compatible devices. Liasse AZUR_GB.book Page 1 Jeudi, 21. avril 2005 4:09 16- 2 - Safety instructions and recommendations • Do not install your photo printer in a humid room (bathroom, laundry, kitchen, etc.), or within 1.50 m of a tap or water source, or outside. The printer should be operated within an ambient temperature range of 10 °C to 35 °C. Your printer should be used at an ambient temperature of between 15°C and 35°C for optimum printing results. • Do not set up your printer in a dusty environment as dust deposits might adversely affect the print quality of your photos. • Only the power supply provided with the printer should be used. Connect this to the mains in accordance with the installation instructions in this user guide and the information on the identification label affixed to the power supply (voltage, current, mains frequency). As a precaution, in case of danger, the mains adapters act as a disconnecting mechanism for the 230V power supply. They should be placed near the device and should be easily accessible. • Never open the cover of the film cartridge compartment during printing. This could break the film and cause printer malfunction. • Only use SAGEM consumables, if not you are likely to damage the equipment and invalidate the guarantee. To obtain the references of the consumables (Refer to paragraph Replacement of consumables, page-33). • The CE marking certifies that the product meets the main requirements of the European Parliament... »