Notice TOKAI 3-LRE-153

« l stop. P25 Display Show Alarm 1 wake up by Radio Display Show Alarm 2 wake up by Buzzer Display Show Alarm 2 wake up by Radio d. 12/24 H Set Mode e. RTC Hour Set Mode Display Show 12/24 H Set Mode (Select 24H) Display Show 12/24 H Set Mode (Select 12H) Display Show Hour Set Mode f. RTC Min Set Mode Remark : Second will reset for every minutes adjustment Display Show Min Set Mode P21 - Snooze interval is 9 minute (not include second offset) - Snooze will continue unless press On/Off (Alarm off) button (9) to Alarm off of Buzzer Alarm or Radio Alarm stop automatically after 30 minutes. 4. CHANGE DISPLAY CONTENT Press button (8) during normal can switch to display year, after 5 second timeout and return back to display time. 5. CHANGE DISPLAY CONTENT Press button (7) during normal can switch to display month and day, after 5 second timeout and return back to display time. 6. SLEEP FUNCTION During radio on mode, press Snooze/Sleep button (10) to turn on Sleep mode, the Sleep time will keep flashing by 5 second, within 5 second and press Sleep button can change the duration from 90 min – 15 min. Press On/Off button (9) to cancel sleep function. Display Show Year Display Show Month and Day Display Show Setting Sleep Duration P26P27 DST – Daylight Saving Time Press button (8) and hold for 3 seconds to toggle on and off DST Function. 7. THERMOMETER FUNCTION Remark : Temperature Range for Indoor : 0 to +50°C or 32 to 122°F LINE IN OPERATION You can play other music sources (MP3 player or other digital audio player) through the speaker of this player by connecting the LINE IN JACK (13) to your external players audio out jack or headphone jack. 1. Plug one end of an audio cable (not included) into the LINE IN JACK (13) and the other end of the cable to the headphone jack of your digital audio player. 2. Press ON/OFF BUTTON (9) to turn on the clock radio. 3. Play your digital audio player. 4. Turn the VOLUME CONTROL (14) until you reach a comfortable listening level. Display Show Under Sleep Mode (Radio Now Turn On) Display Show turn DST Icon On P28 RADIO OPERATION - Press the On/Off button (9) to turn radio On. - Select AM or FM band using the Wave band switch (15). - Select the station using the tuning control (16) - Turn the volume control (14) to adjust volume as required. - Press the On/Off button (9) to turn radio Off. Note : - The AM band use an internal directional aerial. Rotate the radio for best reception. - Ensure that the FM cord antenna (20) is completely unrolled and extended for best FM reception. RESET - The reset bottom (17) is located on the back of unit. Use a ballpoint pen to press it whenever you change the batteries, or unit is not performing as expected. This will return all settings to default value, and you will lose any stored data (alarm and clock settings). PROJECTOR - This unit has a built-in projector for clock. - Set projection On/Off slide switch (24) to On position to turn time projection On. - Focus setting : To adjust the projection clock brightness by turning the focus (6) until the projected time is clearly shown on the ceiling or wall. NOTE : PROJECTS TIME IMAGE ON THE CEILING OR WALL OF A DARKENED ROOM. MAXIMUM PROJECTION DISTANCE IS 3-9 FEET.. SPECIFICATIONS Frenquency range : AM 530 – 1600 kHz FM 88 – 108 MHz Output power : 450 mW Speaker Impedance : 8 ohm Battery backu... »