Notice AEG PS 305 DG

« 145 39 8 40 B A A B B A A B Fig. 14Fig. 13 Fig. 16Fig. 15 Fig. 18Fig. 17 Fig. 20Fig. 19 43 47 46 344 45 Fig. 22Fig. 21 Fig. 24Fig. 23 Fig. 26Fig. 25 24 A B A B67 Do not use cracked or distorted saw blades. Before using the tool please read the instructions. If possible have the tool demonstrated. The dust produced when using this tool may be harmful to health. Use a dust absorption system and wear a suitable dust protection mask. Remove deposited dust thoroughly, e.g. with a vacuum cleaner. Stock having a round or irregular cross section (such as ?rewood) must not be cut, as it can not be securely held during cutting. When sawing thin stock layed on edge, a suitable auxilary fence must be used for ?rm support. SPECIFIED CONDITIONS OF USE The mitre saw can be used for sawing solid wood, bonded wood, glued veneer, materials similar to wood, and plastics. Do not use this product in any other way as stated for normal use. EC-DECLARATION OF CONFORMITY We declare under our sole responsibility that this product is in conformity with the following standards or standardized documents. EN 61029, EN 55014-1, EN 55014-2, EN 61000-3-2, EN 61000-3-3 in accordance with the regulations 98/37/EC, 2004/108/EC Rainer Kumpf Manager Product Development Winnenden, 2008-08-26 MAINS CONNECTION Connect only to single-phase a.c. current and only to the system voltage indicated on the rating plate. It is also possible to connect to sockets without an earthing contact as the design conforms to safety class II. MAINTENANCE The ventilation slots of the machine must be kept clear at all times. Use only AEG accessories and AEG spare parts. Should components need to be replaced which have not been described, please contact one of our AEG service agents (see our list of guarantee/service addresses). If needed, an exploded view of the tool can be ordered. Please state the Article No. as well as the machine type printed on the label and order the drawing at your local service agents or directly at: AEG Electric Tools, Max-Eyth-Straße 10, D-71364 Winnenden, Germany. SYMBOLS Please read the instructions carefully before starting the machine. Always disconnect the plug from the socket before carrying out any work on the machine. Wear ear protectors! Always wear goggles when using the machine. Always keep hands away from the path of the saw blade. Never expose tool to rain. Danger Do not dispose of electric tools together with household waste material! In observance of European Directive 2002/96/EC on waste electrical and electronic equipment and its implementation in accordance with national law, electric tools that have reached the end of their life must be collected separately and returned to an environmentally compatible recycling facility. ENGLISH TECHNICAL DATA Rated input ....................................................................... Amps ................................................................................ No-load speed .................................................................. Saw blade dia. x hole dia.................................................. Saw blade thickness ......................................................... Cutting width horizontal / vertical 90° 90° ............................................................. 45° 90° ......................... »