Notice XENA XN14

« ANCHOR XGA-01, XGA-02, XGA-03 *For more product details, please check with your local XENA dealer or visit www.xenasecurity.com 1. Thickness of brake-disc: Standard issue on virtually all motorcycle models at just under 7mm (1/4”) 2. Locking-pin size: from 7mm (1/4”) to 14mm (1/2”) (according to XENA model). 3. Distance from locking-pin to back of disc-slot*: from 42mm (1 5/8”) to 65mm (2 1/2”) (according to XENA model). *Note that the locking pin can pass through ANY hole on the brake disc (see dark area on diagram). Fitting XENA to your motorcycle’s brake disc Area for locking pin ENGLISH 1. Silicone gasket 2. Battery pack 3. Lock barrel 4. Locking pin 5. Re?ector 6. Screw 7. Alarm module 8. Module cover (Not apply for XZ1) ABCENGLISH 56 ENGLISH (See the Fitment area at www.xenasecurity.com/fitment). The Alarm System • Your XENA alarmed disc-lock is self-arming. It will activate within approximately 5 seconds of being locked onto your brake disc. • No on-off switch is required. The unit automatically senses the presence of your brake disc. • Once in place, the unit will beep once to con?rm that it is armed. • After it is armed, the unit’s dual shock & motion sensors work independently to determine if your bike is being tampered with. • When triggered, the unit will emit two countdown beeps, and then the alarm will sound for 10-15 seconds. • If the attack continues, the alarm will re-sound. If the attack stops, the unit will re-set itself. Replacing the Batteries • With Allen key provided, remove the retaining screw on the underside of the lock and slide o? the battery lid. (no battery lid for XZ1) • Lift off the silicon gasket and then remove and replace the battery pack at the front of the alarm module. Ensure that the battery pack is oriented correctly with the upwards-pointing arrows; incorrect position can damage the battery contacts. • Replace the alarm module and silicone gasket and secure the battery lid in place with the retaining screw. The unit will emit one beep to con?rm that the batteries have been installed correctly. • Use a XENA XBP-1 battery pack available from all authorized XENA dealers, or alternatively ?ll the battery pack with 6x generic LR44 button-cell batteries. Battery Life • Under normal use, batteries should last 8 months. Frequent alarm triggering or extreme temperature conditions can a?ect battery life. • A constant ticking noise or a noticeable deterioration in alarm sound quality are both indications that batteries are low. • Low batteries will affect performance. Replace batteries at the ?rst sign of low power. Keys • Each lock is supplied with three keys and a key tag with 7-digit serial number beginning with the letter X (ie, X123456). Use this unique identi?cation number to order more keys for your lock; the key tag should not be kept with the keys but stored in a safe place. • If keys are lost we will require the keytag along with owner details (including name, address and telephone number) and a receipt for the purchase of the lock. Keys will only be sent to the owner’s address. • For more information, email: info@xenasecurity.com Caring for Your Lock • Keep your reflector plate clean. Use a dry cloth to keep the LED re?ector plate on the underside of the lock inside the disc-slot clean and free of dirt, dust, grease and grime. An obstructed re?ector plate can adversely a?ect performance.ENGLISHENGLI... »