Notice ALPINE HCE-C212F

Notice ALPINE HCE-C212F

Mode d'emploi ALPINE HCE-C212F disponible.

Groupe d'entraide des utilisateurs ALPINE HCE-C212F

Bienvenue dans le groupe d'entraide des utilisateurs
ALPINE HCE-C212F

Le groupe d'entraide ALPINE HCE-C212F vous donne des conseils d'utilisation, solutions aux problèmes de fonctionnement, entretien et assistance pour votre Caméra de recul. Rejoignez GRATUITEMENT notre groupe d'entraide HCE-C212F pour vous aider à mieux utiliser votre Caméra de recul ALPINE. Le SAV entre consommateurs donne accès à différents services pour votre ALPINE HCE-C212F : accès à la notice HCE-C212F et mode d'emploi pdf, manuel d'utilisation en français, avis consommateur et forum actif. Soyez le premier membre actif de ce groupe d'entraide.

ALPINE HCE-C212F

Dernières actualités du groupe d'entraide ALPINE HCE-C212F

Nouvelles questions du forum

Lancez la discussion

Nouveaux membres

  • nogopet376  depuis le 15/12/2020 - Expertise (non renseigné) - Utilisateur depuis (non renseigné)

Documentation disponible sur votre produit

Notice disponible après inscription gratuite au groupe d'entraide

Manuel/Notice/Mode d'emploi | 780 K | Français

Pas de lien disponible

Pas de vidéo disponible

« . Phone 0870-33 33 763 ALPINE ELECTRONICS FRANCE S.A.R.L. (RCS PONTOISE B 338 101 280) 98, Rue de la Belle Etoile, Z.I. Paris Nord Il, B.P. 50016, 95945 Roissy Charles de Gaulle Cedex, France Phone 01-48638989 ALPINE ITALIA S.p.A. Viale C. Colombo 8, 20090 Trezzano Sul Naviglio (MI), Italy Phone 02-484781 ALPINE ELECTRONICS DE ESPAÑA, S.A. Portal de Gamarra 36, Pabellón, 32 01013 Vitoria (Alava)-APDO 133, Spain Phone 945-283588 ALPINE ELECTRONICS (BENELUX) GmbH Leuvensesteenweg 510-B6, 1930 Zaventem, Belgium Phone 02-725-13 15 YAMAGATA Co., Ltd. 2-6-34, Takashima, Nishi-ku, Yokohama-shi, Kanagawa, 220-8515 Japan Designed by ALPINE Japan Printed in Japan (Y-A2A) 68-21057Z11-A Operating Instructions English WARNING This symbol means important instructions. Failure to heed them can result in serious injury or death. WHEN USING A CAMERA SYSTEM, THE DRIVER MUST VISUALLY CHECK ACTUAL CONDITIONS AROUND THE VEHICLE. MAKE SURE THERE ARE NO PERSONS OR ANIMALS IN THE AREA IN WHICH YOU ARE MANEUVERING OTHERWISE YOU COULD INJURE THEM. A camera assists the driver by sending images to the screen showing conditions in view of the camera. The camera uses a wide-angle lens. Therefore, there is a difference in distance perspective between what is normally seen and what appears on the screen. Also, the images shown by the rearview camera are reversed, so as to appear the same as what is seen through the rearview mirror. The camera may not perform to full capability due to variables such as: weather conditions such as hard rain, snow, fog or mud extremely high or low temperatures near camera slope of vehicle and/or roadway direct exposure to very bright light such as headlamp or bright sunlight moving from very dark to very bright light and vice versa such as in parking garages or tunnels extremely low light areas walls or objects that are located diagonally in relation to the camera retracted mirrors that change camera viewing angle open doors or trunks changes to height of vehicle due to loading capacity or hydraulic suspensions obstacles located at the corner of the vehicle DO NOT DISASSEMBLE OR ALTER. Doing so may result in an accident, fire or electric shock. KEEP SMALL OBJECTS SUCH AS BOLTS OR SCREWS OUT OF THE REACH OF CHILDREN. Swallowing them may result in serious injury. If swallowed, consult a physician immediately. USE THE CORRECT AMPERE RATING WHEN REPLACING FUSES. Failure to do so may result in fire or electric shock. USE ONLY IN CARS WITH A 12 VOLT NEGATIVE GROUND. (Check with your dealer if you are not sure.) Failure to do so may result in fire, etc. BEFORE WIRING, DISCONNECT THE CABLE FROM THE NEGATIVE BATTERY TERMINAL. Failure to do so may result in electric shock or injury due to electrical shorts. DO NOT USE BOLTS OR NUTS IN THE BRAKE OR STEERING SYSTEMS TO MAKE GROUND CONNECTIONS. Bolts or nuts used for the brake or steering systems (or any other safety-related system), or tanks should NEVER be used for installations or ground connections. Using such parts could disable control of the vehicle and cause fire etc. DO NOT DAMAGE PIPE OR WIRING WHEN DRILLING HOLES. When drilling holes in the chassis for installation, take precautions so as not to contact, damage or obstruct pipes, fuel lines, tanks or electrical wiring. Failure to take such precautions may result in fire. MINIMIZE DISPLAY VIEWING WHILE DRIVING.... »

En cours...