Notice INFOSEC Z3 Zenergy Box

« Internet/xDSL modem with its RJ45 line protection. 2. MAIN CHARACTERISTICS ? A highly-reliable microprocessor control ? High frequency technology ? Automatic restart during AC power recovery ? Cold start feature if no power supply ? Automatic frequency detection ? Indicator lights and an audible alarm ? Compact size and lightweight ? Phone/modem or network surge protection 3. SAFETY INSTRUCTIONS – Security ? Risk of electric shock: ? The UPS unit uses potentially hazardous voltages. Do not attempt to disassemble this equipment as it does not contain accessible components that can be repaired by users, fuse change excepted. ? All repairs should be performed by qualified technicians only. ? The utility power outlet shall be near the equipment and easily accessible. To isolate the UPS from AC input, remove the plug from the utility power outlet. ? The UPS has its own internal power supply (battery). There is a risk that output sockets may still be live after the UPS has been disconnected from the mains power supply. ? In an emergency situation, switch the UPS to the “Off” position and disconnect the unit from the AC power supply. ? When the UPS is out of order, please refer to section: “trouble shooting” and call the hot line. ? Connected products: ? Combined UPS and connected equipment leakage current should not exceed 3,5 mA. ? Make sure that the connected load does not exceed UPS capabilities. To ensure improved backup time and longer battery life, we recommend a load equivalent to 1/3 of nominal power. ? Do not plug the UPS input into its own output socket. ? Do not plug the UPS into a power strip or surge suppressor. INFOSEC UPS SYSTEM - 4, rue de la Rigotière - 44700 Orvault - FRANCE - www.infosec-ups.com Hot Line – Tel + 33 (0)2 40 76 15 82 - Fax + 33 (0)2 40 94 29 51 - hotline@infosec.fr – 12 10 AA 59 204 07 3 ? The UPS has been designed for personal computers. It should not be used with electrical or electronic equipment with inductive loads such as motors or fluorescent lights. ? Do not connect any household appliances such as microwaves, vacuum cleaners, hair dryers or life-support systems to the UPS. ? Due to excessive consumption, laser printers should not be connected to the UPS. ? Please replace the fuse only with the same type and amperage in order to avoid fire hazards. o Good disposals of the device: ? The mains outlet that supplies the UPS shall be located near the UPS and shall be easily accessible. ? Install the UPS in a temperature and humidity-controlled indoor area free of conductive interference. ? It should not be exposed to direct sunlight or sources of heat. Do not cover the ventilation slots. ? Disconnect the UPS from AC power before cleaning with a damp cloth (no cleaning products). ? Do not leave any recipients containing liquid on or near the UPS. ? About batteries: ? It is recommended that a qualified technician change the battery. ? Do not dispose of the battery in a fire as it may explode. ? Do not open or damage the battery. Released electrolyte can be toxic and harmful to the skin and eyes. In case of eyes or skin contact, wash it immediately with water. ? The UPS contains one or two large-capacity batteries. To avoid any danger of electric shock do not open it/them. If a battery needs servicing or has to be replaced, please contact the distributor. ? Servicing... »