Notice ICES ICRP-211

« all not be exposed to excessive heat such as sunshine, fire or the like. SAFETY PRECAUTIONS This is a delicate electronic unit; *The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shalll be placed on apparatus. *A minimum distance of 5cm should be left arround teh apparatusfor sufficient ventilations. *No naked flame sources such as lighted candles should be placed on the apparatus. *When replacing the battery, be sure to dispose of the old one in accordance with the current regulations. To this end, deposit it at a point which has been provided for this purpose, in order that it will be disposed of in a safe and environmentally-friendly way. *The apparatus can be worked regularly between 10 to 40°C. *To prevent fire or shock hazard, do not expose this appliance to rain or moisture. *The ventilation should not be impeded by covering the ventilationopenings with items, such as newspapers, table-cloths, curtains, etc. CAUTION RISK OF ELECTRIC SHOCKDO NOT OPEN ICES ICRP211 (English).p652010/7/29, ¤U¤È 04:53212 10 9 16 678183517 14 192 14 15 11 13 The marking plate is indicated on the back side of the unit. CONNECTING THE UNIT Insert the wired plug correctly into a power outlet. The clock display will show "0 : 0 0" and you need to set the correct time. It will also return to show "0 : 0 0" if there has been a power out and no back-up battery is fitted. TO SET THE TIME Make sure the unit is in Standby mode, that means the AM or FM Indicator is not light on. 1.Press once the Time Set Button. Then the current time will be flashing. 2.Press the Hour Button to adjust the hour digit. 3.Press the Minute Button to adjust the minute digit. 4.Press once again the Time Set Button when it reaches the right time. Then the current time will stop flashing. CONFIGURATION AND FUNCTIONS : 1.ON Button 2.Volume Up Button 3.Volume down / Alarm Button 4.Minute / Tuning Up Button 5.Hour / Tuning Down Button 6.Time Set / Memory Button 7.Band Button 8.Alarm Off Button 9.Alarm Mode - Radio / Buzzer Button 10.Preset Button 11.Snooze / Sleep Button 12.Alarm Indicator 13.Battery Compartment 14.AM Indicator 15.FM Indicator 16.LED Display 17.Built-in Speaker 18.Projector ON / OFF Button 19.Projector - Focus Knob ICES ICRP211 (English).p652010/10/6, ¤W¤È 11:453RADIO OPERATION 1.Press the ON Button until the display change to radio mode. 2.Select the AM or FM band by pressing the BAND Button. Then the AM or FM indicator will light on. 3.Tune a station by pressing the TUNING UP/DOWN Button. Pressing either TUNING UP/DOWN Button for more than 0.5 seconds to activate the automatic tuning mode. The automatic tuner will scan up or down and lock onto the next station. If the automatic tuning does not precisely tune into a radio station, press the TUNING UP/DOWN Button to adjust the tuning. 4.Adjust the volume by pressing VOLUME UP/DOWN Button. The volume indicator will be changing and represent the volume level. 5.To turn off the radio, press once the ON Button then it will return to Standby mode. 6.After tuned into a radio station, the unit will return to show the current time instead of the radio frequency after a few seconds. If you want to check the radio frequency, press once the TUNING UP or TUNING DOWN button then the unit will show the radio frequency for a few seconds. STORES PRESET STATIONS Up to 20 stations (10 AM and 10... »