Notice TEFAL FV9240

Notice TEFAL FV9240

Mode d'emploi TEFAL FV9240 disponible.

Groupe d'entraide des utilisateurs TEFAL FV9240

Bienvenue dans le groupe d'entraide des utilisateurs
TEFAL FV9240

Le groupe d'entraide TEFAL FV9240 vous donne des conseils d'utilisation, solutions aux problèmes de fonctionnement, entretien et assistance pour votre Fer à repasser. Rejoignez GRATUITEMENT notre groupe d'entraide FV9240 pour vous aider à mieux utiliser votre Fer à repasser TEFAL. Le SAV entre consommateurs donne accès à différents services pour votre TEFAL FV9240 : accès à la notice FV9240 et mode d'emploi pdf, manuel d'utilisation en français, avis consommateur et forum actif. Soyez le premier membre actif de ce groupe d'entraide.

TEFAL FV9240

Dernières actualités du groupe d'entraide TEFAL FV9240

Nouvelles questions du forum

Nouveaux avis

Nouveaux membres

  • nogopet376  depuis le 14/12/2020 - Expertise (non renseigné) - Utilisateur depuis (non renseigné)
  • franciskitwa5  depuis le 31/10/2015 - Expertise (non renseigné) - Utilisateur depuis (non renseigné)

Documentation disponible sur votre produit

Notice disponible après inscription gratuite au groupe d'entraide

Manuel/Notice/Mode d'emploi | 479 K | Français

Pas de vidéo disponible

« s the elements contained in water during evaporation.The types of water listed below contain organic waste or mineral elements that can cause spitting, brown staining,or premature wear of the appliance :water from clothes dryers, scented or softened water,water from refrigerators,batteries or air conditioners, pure distilled or demineralised water or rain water should not be used in your Tefal iron.Also do not to use boiled,filtered or bottled water. Warning! Before using your iron with the steam function for the first time,we recommend that you operate it in a horizontal position for a few moments,away from your linen,i.e.press the Shot of Steam button a few times. During the first few uses,a harmless odour and smoke may be given off. This has no effect on the use of the iron and will disappear quickly. Warning ! Remove any labels from the soleplatebefore heating up the iron (depending on model).1- STEAM IRONING -Unplug your iron before filling it.-Set the steam control to DRY (A).-Take the iron in one hand and tilt it slightly,soleplate downwards (D).-To open the water tank stopper,turn it anticlockwise until the arrow on the stopper points to the “open padlock” symbol (B).It will lift automatically.-Fill the tank up to the “MAX” line (D).-Re-close the tank stopper (C).To close the stopper,align the arrow with the “open padlock” symbol then turn it clockwise until the arrow is aligned with the “closed padlock” symbol.-You can now plug in your iron. Filling the water tank Recommendations: Fabrics and ironing temperatures: • Your iron heats up quickly:so begin by ironing fabrics that are ironed at low temperatures first,then go on to those requiring a higher temperature, • if you change to a program requiring lower temperatures,wait for the thermostat light to come on again before continuing to iron (for models fitted with the “Thermo-Alert”, refer to the section “Thermo-Alert function”). • when ironing fabrics with mixed fibres,set the ironing temperature for the most delicate fibre. For delicate fabrics we recommend testing the fabric first on an inconspicious place eg (inside them). • For best results we recommend you use a vented ironing board to allow the powerful steam to penetrate through the fabric more efficiently. • Ensure that the fabric you are ironing is flat to avoid steam venting sideways whilst ironing. Choose your ironing programme Your iron has 8 ironing programmes: A1 2 BD1 2 C • For each program corresponding to a type of textile to be ironed,your iron automatically and precisely determines the most suitable temperature and steam flow to guarantee best results. •To select the appropriate ironing program,use the program selector beneath the grip (E).-Pressing on the left side :selects the programs requiring low temperature and steam levels.Beyond program 1,pressing the program selector has no effect.-Pressing on the right side :selects the programs requiring high temperature and steam levels.Beyond program 8,pressing the program selector has no effect.- The program selected appears automatically on the indicator panel at the front of the iron (F).-Set the steam control to steam ( )-When your iron reaches the required temperature,the thermostat indicator goes out (G).You can start ironing. EGF-Ideal for removing creases from suits,jackets,skirts,hanging curtains etc -Hang the garment on a hanger and hold the fabric slightly taut with one hand. The steam is very h... »

Activité de ce groupe d'entraide

Note moyenne du groupe
3 étoiles
Durée moyenne d’utilisation
Avis consommateur
3 avis
En cours...