Notice APPLE Oreillette Bluetooth pour iPhone

« provide a more comfortable ? t. 2 Make a call on iPhone. Press the button on top of the headset to answer an incoming call. ButtonStatus light If you answer an incoming call by tapping the iPhone touchscreen, audio is routed through iPhone instead. 3 When you ? nish, press the button to end the call.English 5 Adjust the Volume m Use the volume buttons on the side of iPhone. WARNING: For important safety information about avoiding hearing loss, see page 14. What Else You Can Do ToDo this Decline incoming callPress button for about one second, until you hear a beep. Switch to incoming or on-hold call and put current call on hold Press button. Switch to incoming or on-hold call and end current call Press button for about one second, until you hear a beep. Check whether headset is turned on Press button. If headset is on, status light blinks green and headset beeps. Turn headset onPress and hold button for about three seconds, until you see the status light blink green or hear four rising tones. Turn headset o? Press and hold button for about four seconds, until you see the status light blink amber or hear four falling tones. 6 English Switch from the Headset to iPhone To stop using the headset and hear calls through iPhone instead, you can either: m Turn the headset o? . You can turn it on again at any time to use it with iPhone. m During a call, tap Audio Source on iPhone and choose iPhone or Speaker (for speakerphone). Reconnect the Headset to iPhone You can tell that calls will be routed through the headset if the Bluetooth icon (?) in the iPhone status bar is blue or white (depending on which application you’re using). If the headset gets disconnected from iPhone, two low beeps sound from the headset. You can tell that the headset is disconnected from iPhone if the Bluetooth icon in the status bar is gray or isn’t present. To route calls through the headset: m Press the button to reinitiate a connection. m If that doesn’t work, make sure the headset is turned on, charged, and in range of iPhone (within about 30 feet). m If that doesn’t work, on iPhone make sure Bluetooth is turned on. From the Home screen, choose Settings > General > Bluetooth and turn Bluetooth on.English 7 m If that doesn’t work, pair the headset with iPhone again. See page 3. If the headset is paired with other Bluetooth devices, you’ll need to reconnect it to iPhone after turning the headset o? or after using it with one of the other devices. Charge the Headset When the headset doesn’t have much charge left, a long beep sounds every ten seconds. To charge the headset: 1 Connect the included iPhone Bluetooth Travel Cable to your computer. Or connect it to the Apple USB Power Adapter that comes with iPhone and connect the adapter to a power outlet. 2 Connect the headset to the cable. A fully depleted headset recharges in about an hour and a half. Status light amber = Charging Status light green = Completely charged 3 Remove the headset from the cable. Press the button to connect the headset to iPhone, so that calls are routed through the headset.8 English To see how much charge is left: m Connect the iPhone Bluetooth Travel Cable to your computer or an Apple USB Power Adapter plugged into a power outlet. Then connect iPhone and the headset to the cable. The iPhone screen shows the headset’s battery level. The headset co... »