Notice APPLE Cinema Display HD 30"

« stered in the U.S. and other countries. The FireWire logo and iSight are trademarks of Apple Computer, Inc. ENERGY STAR is a U.S. registered trademark. Other company and product names mentioned herein are trademarks of their respective companies. Mention of third-party products is for informational purposes only and constitutes neither an endorsement nor a recommendation. Apple assumes no responsibility with regard to the performance or use of these products. 3 1 Getting Started Congratulations on purchasing your new Apple Cinema Display. Follow the instructions in this booklet to set up and use your new display. Your new display is designed so you can set it up quickly and start using it right away. Be sure to read all the installation instructions and safety information in this guide before you plug your display into an outlet or power strip. What You Need To use your 20-inch or 23-inch Apple Cinema Display, you need: • Mac OS X v10.2.8 or later and one of the following computers: • Power Mac G5 • Power Mac G4 with a DVI port* • PowerBook with a DVI port Note: Some features may require the latest version of Mac OS X. To update your software, choose Apple ( K ) > System Preferences, click Software Update, and click Check Now. Use Software Update often to ensure your system has the latest software. To use your 30-inch Apple Cinema Display, you need a: • Power Mac G5 • High-end graphics card (see the label on the box for the required version of Mac OS X)* Note: You may also be able to use the Apple Cinema Display with a Windows PC that has an appropriate video card with a DVI port. * Go to www.apple.com/displays for more information about the specific Macintosh computers and graphics cards that are compatible with your display. 4 Setting Up Your Display Follow the steps below to set up your display with Power Mac G4, Power Mac G5, or PowerBook computers with DVI ports. 1 Turn off your computer and leave it plugged into a grounded power outlet. 2 Remove any protective film from the display and power adapter. 3 Plug the DC power cord from the display into the display’s power adapter. The DC plug can be inserted into the power adapter either way. 4 Plug the AC cord into the display’s power adapter and into a grounded power outlet. 5 Connect the DVI, USB, and FireWire cables from the display to the corresponding ports on your computer. 6 Press the power button on your computer to turn it on. The display turns on automatically when you turn on your computer. Cinema Display Power Mac DVI USB DC plug AC plug FireWire Power adapter Power outlet Cinema Display PowerBook DC plug AC plug DVIUSBFireWirePower adapter Power outlet 5 Using Your Display You’ve done everything you need to get your display up and running. You can adjust your display’s resolution, brightness, and color settings. You can also attach an iSight camera to your display or attach your display to an alternate mounting solution. Adjusting Your Display Settings Use the buttons on the right side of the display to turn your display on and off and to adjust the brightness up (+) or down (-). Use System Preferences to adjust the resolution, brightness, and color on your display. 1 Choose Apple (... »