Notice LG GE20NU10

« achine does not have an ON/OFF switch. As soon as it is connected to the AC power, the power up sequence begins. The power supply cord is intended to serve as the main disconnect device. The power outlet shall be near the equipment and shall be easily accessible. • The appliance is not intended for use by young children or infirm persons without supervision. • Young Children should be supervised to ensure that they do not play with appliance. • If the appliance is supplied from a cord extension set or an electrical portable outlet device, the cord extension set on electrical portable outlet device must be positioned so that it is not subject to splashing or ingress of moisture. Installation To AC wall outlet. USB converter cable NOTES Connecting to computer Hardware Installation NOTES1. Disc Tray 2. Drive activity indicators The LED used to indicate the operation of External Super Multi DVD Rewriter. 3. Emergency Eject Hole 4. Stop/Eject Button 1. USB Connector This connector is used to connect to the USB converter cable. 2. Power Connector This connector is used to connect to the AC Power adapter cord. Location and function of controls Removing the USB converter cable The drive supports the plug and play(not swap) function of Windows, and can be removed and inserted by performing the following operation. 1. Stop the application software being currently used. 2. Click the icon “ ” of the taskbar located on your screen’s bottom right side. 3. Click “Safely Remove USB Mass Storage Device-Drive[x:]”. 4. Click “Ok” and then remove the USB converter cable. 1234 This following is the general figure of the design of the drive. The drive’s appearance and specifications may change without prior notice. Front Rear 12 NOTE Don’t remove the USB converter cable when the busy indicator on the drive blinks, or during computer startup.Features • Universal Serial Bus (USB) 2.0 interface for high-speed data transfer. • Buffer Under Run error protection technology • Emergency eject support • Combination of CD-R/RW, DVD-R/RW, DVD+R/RW, DVD+R DL, DVD-R DLand DVD-RAM drive functions into one drive. • Supports region playback control Phase II. • Support SecurDiscTMTechnology. • Supports LightScribe Direct Label Printing Technology - *Optional. * You can use a variety of Drive System meeting the following requirements is needed in order to use USB 2.0 operation with this drive. •Computer that is equipped with a USB 2.0 – compliant USB connector or PCI adapter card, and on which the USB 2.0 EHCI (Enhanced Host Controller Interface) driver software 1)has been installed. 1)The USB 2.0 EHCI driver software is supplied with currently available PCI adapter cards that conform to USB 2.0. Further, Microsoft has released the USB 2.0 EHCI driver software for Windows XP, therefore it is also possible to use this driver software with Windows XP. If you want to know in detail, please contact your USB 2.0 adapter dealer or consult your PC manufacturer, or consult the Microsoft Corporation Web site. System Environment Computer This unit can be operated in the system environment explained here. * For Optimal 20x writing, below CPU and Software are recommended. CPU : Intel Pentium 4 3.4GHz, Intel Pentium D 3.4GHz, Intel Pentium Core2Duo 2.0GHz or higher,AMD Athlon 64 4200+ or higher. Software : USB Booster (“Please install USB Booster Program with LG external Drive for DVD±R20x wr... »