Notice D-LINK DAP-1160

« ClickQuick Installation Package Contents WIRELESS G ACCESS POINT23 Troubleshooting 1. How do I configure my DAP-1160AP without the CD, or check my Wireless Network Name (SSID) and Wireless Encryption Key? •Connect your PC to the Access Point (AP) using an Ethernet cable. •Open a web browser and enter the address http://192.168.0.50 •The default username is ‘admin’. The default password is ‘’ (leave the field blank) •If you have changed the password and can not remember it, you will need to reset the AP to set the password back to ‘’ (leave the field blank). 2. How do I reset my AP to factory default settings? •Ensure the Access Point is powered on. •Press and hold the reset button on the rear of the device for 20 seconds. Note: Resetting the AP to factory default will erase the current configuration settings. To re- configure your settings, log into the AP as outlined in question 1, then run the Setup Wizard. 3. How do I add a new wireless client or PC if I have forgotten my Wireless Network Name (SSID) or Wireless Encryption Key? •For every PC that needs to connect to the AP wirelessly, you will need to ensure you use the correct Wireless Network Name (SSID) and encryption key. •Use the web based user interface (as described in question 1 above) to choose your wireless settings. •Make sure you take a note of the settings so that you can enter them into each wirelessly connected PC. D-Link has provided a handy sticker for you to note them down and attach to your AP, or other location you find most convenient. 4. What can I do if my AP is not working correctly? •The manual contains a full troubleshooting section and can be downloaded from the D-Link website (see below), however there are a few quick steps you can take to try and resolve any issues: •Check the LED’s on the front of the AP. The Power, Wireless, and Status LED should be on. One or more of the LAN LED should flash. •Check that all the cables are firmly connected at both ends. •Power the AP off for 20 seconds, and then power it back on. Note: If you are unable to connect, see the Troubleshooting chapter of the product manual in the D-Link DAP-1160 Wireless G Access Point. Technical Support Thank you for choosing D-Link products. For further information, support, product updates or to download the User Manual please visit the D-Link website at www.dlink.eu. http://www.dlink.co.uk4 InstallationsanleitungDAP-1160 WIRELESS G ACCESS POINT DAP-1160 Wireless G Access Point CD-ROM (D-Link “Click’n’Connect” , Setup-Assistent, Handbuch, Installationsanleitung) Kat5e Ethernet Kabel Steckernetzteil Sollte eines dieser Teile fehlen, wenden Sie sich bitte an Ihren Fachhändler. IP: 192.168.0.50 Benutzername: Admin Passwort: 1 D-Link “Click’n’Connect” CD herausnehmen.2 A. Stellen Sie sicher das Ihr AP synchron ist. B. Legen Sie die D-Link “Click’n’Connect” CD ins Laufwerk ein. C. Klicken SieInstallationsanleitung Lieferumfang Hinweis : Die Verwendung eines Netzteils mit abweichender Spannung führt zur Beschädigung des Geräts und zum Erlöschen der Garantie. Autostart für das CD/DVD Laufwerk muss aktiv sein.45 Fehlerbehebung 1. Wie kann ich meinen DAP-1160AP ohne die CD konfigurieren oder den Namen des drahtlosen Netzwerks (SSID) und den Schlüssel für die drahtlose Verbindung überprüfen?•Verbinden Sie den PC über ein Ethernet-Kabel mit dem Access Point (AP).•Öffnen Sie den Webbrowser, und geben Sie... »