Forum DENON SC 2900

Bonjour,

Il faut que tu ailles sur le site DENONDJ.COM
Tu vas dans le menu product et tu sélectionnes MEDIA PLAYERS.
Ensuite tu sélectionnes la SC2900.
En bas à droite de la page tu vas sur DOWNLOAD Latest Firmware.
Le driver téléchargé tu dois le mettre sur une clé USB à insérer dans le lecteur.
Voici les explications de DENON.
Si tu as un problème pour l'installer écris à nouveau .1. Unzip the update file that you downloaded from denondj.com to a folder of your choice. Example: (“My Documents” or “Desktop”)
2. Using your computer, find the unzipped file SC2900FW.BIN and copy it to the root of a USB memory device. (Flash Drive, Hard Drive...etc) The drive must be formatted as FAT/FAT32! When file copy is complete, safely remove the USB memory device from your computer.
3. Make sure the power of the DN-SC2900 is currently turned OFF.
4. Insert the memory device (Flash Drive Hard Drive...etc) into the USB-A port on the top panel of the
DN-SC2900.
5. On the DN-SC2900, press and hold the BACK: left & right arrow buttons (see Fig 1 below). (les deux flèches à droite et à gauche de la molette)
While holding both back arrow buttons Power ON the DN-SC2900. Once the display says, VerUP Mode, Push Cue you can release these two buttons.
6. Press the [CUE] button. You will see Current Version -> Update Version, Push Play.
7. Push the [PLAY/PAUSE] button, then display will first indicate: Now Updating, Keep Pow ON
*It takes about 60 seconds to complete the entire update, please wait.
8. When the player is finished updating the screen will show, Complete!, PleasePowOFF.
9. It is now OK to turn the power OFF and reset the player back to normal mode.

merci pour ton aide mise a jour effectuée