Notice AMANA AFI2538AES disponible gratuitement après inscription

Extrait de la notice

er hinge pin with a 5/16”hex head driver and retain hinge pin for later use. 12.Remove Phillips screws to remove right and left hinges; retain all screws for later use. 13.Remove both stabilizing brackets with 3/8”hex head driver; retain screws for later use. Tabs Connector6 Installation Pullout Freezer Drawer To avoid electrical shock which can cause severe personal injury or death, disconnect power to refrigerator beforeremoving doors. After replacing doors, connect power. WARNING To avoid possible injury, product, or property damage, you will need two people to perform the following instructions. Important: Alwaysunload food in freezer trays beforeremoving trays. CAUTION 3.Remove Phillips screws from each of the drawer slides. Door Reinstallation 1. Install hinge assemblies: •Install center hinge with Phillips screws. 2.Place hinge side of refrigerator door on center hinge pin. •Install top hinge with 5/16”hex head screws. 3.While holding refrigerator door upright, tighten down top hinge with 5/16”hex head driver. 4.Reconnect connector. 5.Connect the waterline tubes firmly by pushing one waterline inside the other. 6.Slide the black locking collar fully forward. 7.Hold tabbed section of waterline. 8.Rotate black locking collar counterclockwiselocking water lines in place. A “click” is heard ensuring waterlinesare correctly locked in place. The “arrow” on the tabbed section should align with the 2 bars on the black locking collar. 9.Ensure the connection does not leak beforeinstalling the upper hinge cover. 10.Replace top hinge covers. To Remove: 1.Pull drawer open to full extension. 2.Slide freezer drawer forward and lift straight out. 4.Lift top of drawer front to unhook the drawer from the slides....