? If accessible turn off the water tap ? Wait a few minutes before unloading the dishes: they are very hot! If you wait a little while, they dry better thanks to the steam. Empty the lower rack first. There's been a powerfailure? Have you openedthe dishwasher door? The wash cycle stops and then restarts when the electricity comes back on or when you shut the door. Everything is under control! If opening the door soon after the end of the program, or during it, stand away from the Dishwasher, to avoid possible injury from hot steam. You decide when it starts. When you have loaded the dishes, you can choose when to start your dishwasher before setting the wash cycle desired. Press button "D" to delay the start of the wash cycle by 12, 9, 6 or 3 hours. Each time you press it, you will hear a short beep and the indicator light "G" corresponding to the selected delay will light up. Now you can select the desired wash cycle. Press the start button "R" and after you hear the beep, the countdown to the delayed start will begin. Once this time is up, the indicator light will stop flashing and the wash cycle will begin. If you have set a 12 hour delay, for example, once you have selected the wash cycle, the 12 hour indicator light will flash followed by the others in sequence until the set time delay is up. A quick look at the indicator lights will keep you informed of the countdown progress at all times. Have you changed yourmind? If you change your mind, you can set a shorter time delay: press button "D" to select it. You need not reset the wash cycle. If on the other hand you want to cancel the delay set and you want the cycle to start immediately, press button "D" repeatedly until the cycle starts and...