Notice ASROCK 939NF4G-VSTA disponible gratuitement après inscription

Accédez à la notice du ASROCK 939NF4G-VSTA en adhérant à la communauté.

Notice d’utilisation de votre ASROCK 939NF4G-VSTA. La notice vous renseigne sur l’utilisation, donne des solutions aux problèmes d’entretien, de fonctionnement et d’assistance pour votre 939NF4G-VSTA.

Notices - manuels - modes d'emploi disponibles pour ASROCK 939NF4G-VSTA après inscription au groupe d'entraide

Aperçu de la notice

Extrait de la notice

motherboard, please refer to Premium Discrete requirement at http://www.asrock.com99999 ASRock 939NF4G-VSTA Motherboard Pre-installation PrecautionsPre-installation PrecautionsPre-installation PrecautionsPre-installation PrecautionsPre-installation Precautions Take note of the following precautions before you install mother- board components or change any motherboard settings. 1.Unplug the power cord from the wall socket before touching any component. Failure to do so may cause severe damage to the motherboard, peripherals, and/or components. 2.To avoid damaging the motherboard components due to static electricity, NEVER place your motherboard directly on the car- pet or the like. Also remember to use a grounded wrist strap or touch a safety grounded object before you handle components. 3.Hold components by the edges and do not touch the ICs. 4.Whenever you uninstall any component, place it on a grounded antstatic pad or in the bag that comes with the component. 5.When placing screws into the screw holes to secure the motherboard to the chassis, please do not over-tighten the screws! Doing so may damage the motherboard. InstallationCPU InstallationCPU InstallationCPU InstallationCPU Installation Step 1.Unlock the socket by lifting the lever up to a 90° angle. Step 2.Position the CPU directly above the socket such that the CPU corner with the golden triangle matches the socket corner with a small triangle. Step 3.Carefully insert the CPU into the socket until it fits in place. The CPU fits only in one correct orientation. DO NOT force the CPU into the socket to avoid bending of the pins. Step 4.When the CPU is in place, press it firmly on the socket...

En cours...